Tool Files and Processing stations
If i delete the tool files from one processing station that uses the same tools in another processing station with it delete the tool file from both?
New Microvellum Release Available Today: Build 26.1.0529.641
We are happy to announce that Microvellum build 26.1.0529.641 is now available! This build includes resolutions for issues with docking sizes, the formula editor, sawing G-code, and more. Please refer to the complete Release Notes for more information
DRAWER SPACER HELP
I am using the plastic drawer spacers on inner drawers of a tall cabinet. My slide is a blum movento. I am getting 2 drwr spacers at the front and back. Would like to add maybe 1 or 2 more in between. Not sure where this is being controlled. F?, H? Subassembly?
Innergy ADMIN
How many different logins are needed to view classroom training? I emailed peak@innergy better then a week ago without response. I am trying to login and register for this off the Splash Screen
2D generated wall doesn't match 3D model
Why does the 2D elevation not match the model? I've tried deleting and re-model but it still shows up incorrectly. Also, I accidentally modeled a cabinet instead of a wall panel so I "undo" the cabinet but it still shows up in the 2D elevation but not
My Case click to a blank screen
Anyone know why when clicking on the my case, the screen go blank and freezes the page to an "aw, Snap! error?
2D Wall Doesn't match 3D model...sometime.
I have to say this is very frustrating. I've been trying to do shop drawings for a few simple wall panels and Microvellum just doesn't want to cooperate. I'm afraid once I get to the more complex part of the project, it'll just be a mess. I can't submit
Nesting Parts Overlapping
I keep getting these sorts of issues pop up, there are two pieces overlapped in that screenshot as well, 3 pieces total. Also have no idea if that error popping up is anything to do with it.
Edgeband Thickness
We use 0 thickness for our edging and premill the edging thickness at the machine. Can we fix the edging thickness to accept 0 for the thickness. Right now I type in 0.000, and you would think that would be the same as 0, but it isn't. If I don't, get
Zoomed WAY out
When I change views in model space Microvellum zooms out so far I lose sight of the drawing. Any ideas what is causing this and how to fix it? Change View gets zoomed way out The model is still there but I have to zoom back in every time. I have looked
Cut List Report for Solid Stock / Hardwood?
Has anyone or anyone made a cut list report for solid stock / hardwood. I know that the Face Frame kind of does this. And the Solid Stock Report(s) give you Linear Footage, Board Feet and Square Feet by solid stock type and width - Which is good for running
Hardcode drawer bottoms to grain the length
How do i brute force or hard code the drawer bottoms to have graining run along the length of the drawer box bottoms please? @Lenny Scianna @Latisha Dauby We never run it the other way and this is now the only hold up to me being
Dado Stop Gap setting in Solid Modeling Tools
The documentation says: Dado Stop Gap – This amount adds a gap to the front or back of the dado. The problem is when you have a vertical entity (a stud) which has a rib that runs horizontal midway through the vertical, the Dado Stop Gap setting is affecting
Consensus Survey
I am curious to have a better understanding how companies engage Microvellum software for submittal drawings. With the advent of the 2D Instructions module, it has become an excellent tool for setting up your plan, elevation and section drawings. I am
Missing Report: Metafile Product Picture Report - Dynamic Images
I'm seeing reference to a report name "Metafile Product Picture Report - Dynamic Images" in KB documents here Can someone point me in the right direction to find this? We are currently on 26.1.422.641 and i only see this following list of reports. Do
Introducing the Processing Center App: The Shop-Floor Replacement for Production (MicroManager)
We want to share an important update regarding the Production application (also known as MicroManager). After careful consideration, Production is transitioning to maintenance-only status. Effective immediately: No new Production licenses will be sold.
Can one Copy a product form one project to another?
I have a modified toe kick in one project I would like to use in another project. Is there an easy way to copy and move it to the new project (not just a new room) ?
Scale text attribute not changing to match viewport in BricsCad
I have used a callout block in AutoCAD for many years, and when clicked, you can change the callout information and change whether the drawing is a section, plan, elevation, and so on. When drafting the scale attribute text changes when I change the scale,
Solid Modeling Tools - Can't move joints
We're trying to test out solid modeling tools/extruded product tool for the first time, but I'm running into a major issue while doing so. For some reason, the insert joint and move joint tools aren't doing anything in the solid modeling editor. They
Model exist but product view data is empty
Was about to edit the product number but can't seem to find the data - it all disappeared but he model can still be seen. These are simple wall panels. Anyone have had this happen and if so, know a fix? Trying to save hours of work.
Model base kick not in the right location
Why does the model not located in the right position despite the anchor points where set to the corner of the wall? MV models it to the right out of the entire assembly. I can bump the product into place but was wondering if there's something fundamentally
Best practice for associative machining between products
I have a cabinet that is 120" tall with a lower carcass @ 96" and an upper @ 24". I have a single door that spans both cabinets with 5 hinges total, 3 below, 2 above. If the upper and lower are listed as separate products, what is the best practice for associating the door machining with both of the cabinets. Note that I tried creating a product with both upper and lower carcass and the door, however, the upper and lower will ship separately so the shop wants them as separate items. Any thoughts
🤔What happened to my drop downs in Shop Drawings
Can't figure it out. Has it happened to anyone else??
Issue: Product Deletion from Model Space Does Not Remove Product from Project (BSB 26.0527)
We have identified what appears to be an issue in Microvellum BSB version 26.0527. When a product is deleted from Model Space while the Product Viewer is open, only the product geometry is removed from the drawing. The product itself remains in the project
FEATURE REQUEST: Additional Auto Assign Rules for Processing Stations
Here at Master Millwork we have several different CNC machines - 4 CNC routers and 1 beam saw to be exact. For our custom stuff we are primarily using 2 of the CNCs and the beam saw. When assigning Processing Stations to parts we have to look at part
Poor Optimization w/ BSB
Despite some reservations we upgraded out license to BSB, mainly for the optimizer improvements. While significantly faster than OEM, I am still getting very poor results. Below is an image of a typical grid, there are 50 sheets that look essentially
Shaped Part Edging
Can we have the line on the shaped part bolder than the non-edged lines. Currently it is bolder but not by much and when the label is printed on the CNC it almost looks the same especially if there are tenons on the ends.
STORETEQ S-200 Has any one got one?
We have a STORETEQ S-200 that we go from Microvellum through Cut rite to use, is there a way to remove Cut rite from the process.
Feature Request - Printable Comments
Something i've always wished we had was a way to convey information on a nesting patter that comes through onto the report drawing. I assume it would work in the following way, user draws something in 2d, makes it a specific colour on a specific layer
Cancel function when processing work order
Sorry if this has already been suggested. How many times have you gone to the work order creation window and hit process then realised you have missed something and need to cancel but cannot. If it's a large creation, this can take many, many minutes
FEATURE REQUEST: Hardware Images in Material File Hardware Library
Something like the below image would be nice, to help keep our very large hardware library straight. It could reference a CAD dwg or require a separate JPEG to be stored, similar to the Product Images, Machine Token Images, etc. If these could be used
CPOUT ERROR WHEN PROCESSING
We just started to get the following error when we are processing jobs. Does not matter if its in the Foundation Library or Legacy Library as it happens in both of them. Has anyone gotten this error and what was the solution? I did send a ticket into
FEATURE REQUEST: Part Properties Open Inside Selected Sub
I like how if you click on a part after selecting to open Edit Design Data, it opens inside of the Sub or Nested Sub that the selected part resides in. I would like to see the same feature on the Part Properties interface as well. It would save a couple
How to find a specific Prompt ?
I there a way to search for a specific prompt ? I am looking for "Wood_Spacer_Height" . It is a hinge side filler for a drawer /pullout. I thought it might be in the global spec group but didn't see it. Is there a better way to find things than just poking
Double Adj shelf thickness
I would like to show an adjustable shelf made from two pieces of 3/4" ply instead of only one piece, is this possible? I found an image of what i am trying to accomplish.
FEATURE REQUEST: Pass Project Properties through to Reports
We would like to see the "Project Properties" as well as the "User Defined Project Properties" pass through from the Job into the reports. I have gone through the process of making my own variable that references the "user name" that is logged into the
Bi-directional Engineering Sync For MV & Innergy
Seeing the previews of the new project creation UI got me thinking about how we handle data between our two platforms. Right now we manually enter or copy/paste info from Innergy into MV > draft/engineer > export > run INN Eng. Sync > then have to verify
MCP Connector For AI Agents
I wouldn't be surprised if this has already been brought up or is in the works in some way, but looking at Autodesk’s new "Claude for Creative Work" integration for Fusion 360, and a similar MCP connector approach here would be a game-changer. It would
Carving Letters
Hey guys, Anyone have an experience with carving letters in microvellum?
2D Instructions Parameter 9
When was the change made that formulas were added for specific layers? I remember a few years back I was able to create for a shop the ability to hide shelf text for ADJ & FIXED. It appears that the formula is set for all text in either Plan, Elevation
Next Page