3 Piece Doors
Good day, Can someone on here help with a 3 piece Door design...We have the shaker door design for our TFL Library, I've been searching through it, What is the easiest way to design a 3 Piece Door, I have a picture attached to look at for example.Drawer box material/sizes
My question is two fold regarding drawer boxes. First, how do we change the material for both the sides and bottoms in the project setup? Second, on non-AWI premium projects we want to attempt to restrict our drawer box heights to the size of premanufacturedRoom Components - Walls - Deleting the wall elevation outline
Does anyone know how to delete the wall outline when using Draw 2D Wall Elevation? We're finalizing an updated custom wall product with multiple ceiling conditions and can't figure out how to delete the wall outline that comes in automatically.Mouse Stutters/Pauses When Selecting Dimensions
Anyone else have this issue where selecting a dimension line will cause the mouse to pause or stutter for a split second before resuming? Lately, the pause is getting long enough that I will move onto the next action but the system is still stuck on selectingBricsCad tiers options
Hello, Looks like right now I have BricsCad Pro tier with Microvellum. It would be great to have an option upgrade to BricsCad BIM or Ultimate.Product Dimension Control
In the older OEM Toolbox my base cabinet and upper cabinet width dimension settings were set to 10" above and 10" below the product. In the new BSB, the dimensions are coming in at 16" above and below my products. I cannot seem to locate the controlsMicrovellum Freezing When Creating Flatshot
I am having an issue where my Microvellum freezes when I attempt to to create a Flatshot. I'm wondering if other users have experienced this. This is i BricsCAD. I do not have the problem in AutoCADQuick measure in BSB
Hey, Working on a BSB trial to looking to switching over from OEM and the first BIG cad command that appears to be missing is the quick dimension using MEASURGEOM command and selecting quick measure (and can be set as default). The result gives you theSection plane on paper (Viewport)
Hello, We are going to start with bsb 2025 very soon and we want to acelerate the way we do the drawings with the paper space. I see the commande section plane. Do we have a way the sectionplane go like a viewport ? We could save so much time. Right nowFeature Request - Drawing/Machine Only Option In 2D Editor
It would be great if we could apply a drawing only / machining only / both value inside the 2D editor when applying the shape so that when the part gets redrawn, we can have a token for a finish size shape that is for drawing purposes only and a tokenElevational Sections For All Products On a Wall
Currently if you select a wall with products associated when using the Draw Product Sections command it allows you to section through the wall and products perpendicular to walls both in Cross Section (side view) and Plan Section (top view). Any reasonDraw Products Favorites Tab
I feel like I am spending more time than I'd like navigating through the draw MV products tabs and drop downs to find the products I use pretty regularly, seems like it wouldn't be all that difficult to have an additional tab on the left that you canDraw 2D Part - Wrong Scale
Hey this has been bugging me since BricsCAD launched and I keep forgetting to post a question. If I have to make custom shaped panel, door or whatever. Before BricsCAD (BBC lol) typically I would draw the shape in the project DWG -> "CopyBase" PLine ->Outsource MV Engineers wanted
We're looking for individuals or companies that can help with our overflow from initial submittals through production engineering. you can email me at: [email protected]Removable drawer inserts option
One of our jobs has requested 1/4" inserts in our drawers. Does microvellium have something built in for this? Have looked but didn't see anything that stood out to me. We are wondering whether we just need to make our own subassembly. thank you inUpdate Title Block in BSB
Has anyone have the issue when you update title blocks for your drawings for multiple blocks BSB for the same attribute (property)? I have 2 different title blocks for project name, address, city, etc. for my cover page and side title for mill work pagesFilter the list of Component Pullouts
Right now there are Pullouts and Pullouts behind doors. This was done since some pullouts need to be attached to the door, and some don't. When you look at the list of Pullouts for each category, they are both the same. This should not be this way.Feature Request: Easier Arrays, and/or smarter EQ Functions
This post was spurred on by me recently updating the die wall product (non-extruded kind), which has a lot of duplicate parts in arrays. EQ Functions have long caused me a lot of confusion, but recently I ran into something very surprising: Parts usingPanel insert?
Can anyone explain to me what this panel insert does on the D workbook, It sounds like what i need to be using instead of the glass door option. I'm using the glass door option as it works, but the shop staff dont seem to the concept behind it, and i'mUnlimited Machining cuts
Can anyone tell me how i might make my sub assembly for reeded drawers do an unlimited amount of cuts. Its purely visual, but that could change, we spindle them right now. Its all based around the groove panel and by default that stops at 31 machiningADA Sink Angled Frame - "Applied Panels"
Requesting an option for "Applied Left &/or Right Panel", including "Material Option - Applied End Material", similar to that in other cabinet products, EX: "Base 1 Drawer" (see attached snip).Cabinet Doors Showing Incorrect Dimensions in New Setup
Right after installing Microvellum Software, following the lessons, whenever I insert any cabinet onto the walls, the doors come out completely out of proportion. I don’t know why — does anyone have an idea?3d Part Thickness Different From Material Thickness
Where in the depths of this program would it reference a previous projects Formula-Based Material thickness? Or is there a defined name somewhere that I'm missing and can't find? In the current project's M! spreadsheet, all of the FBMs are listed (hardGettig Started with Microvellum- Designer/Drafter Role
Hi. Hope everyone is having a good time. I just have a quick question. I am a cabinetmaker by trade, I am upskilling as a drafter/detailer. Question: Where should I start? I mean there is microvellum university for education, but is there any versionA Guide on How to Best Transfer Globals to a New Install
I think it would be really helpful if Microvellum produced a guide that walks through best practices to move all of our globals to a fresh install. If any users have suggestions, I'm all ears.New Project Icon Not Working Build 1204 & FL1121
I have the Icon on my Tool Strip and it won't open a projectBasic Dimensioning question in BSB
In AutoCAD when I picked 2 points that weren't on the same axis, the dimension line would be straight and fine. With BSB it gives me an angled dimension line and it is so annoying. I am sure this is a basic setting but not sure how to change it.Construction options: back construction: no back / removable back are gone
hi, what happened with the new update? the options "no back" and "removable back" seem to have gone. I really enjoyed that featureBrackets being put in wrong?
Every time i put some brackets or fasteners in this edge where my cursor is, its putting them somewhere completely random, the other edges seem to be working as expected. See screenshots. The far left ones are whats been placed on the edge thats givingAdding Machining but is it classed as side machining?
As per the title, i'm trying to use some button fix brackets, its taken me a while to get right they were missing some files out the box which meant the machining that was in there wasn't quite right, but anyway i'm now at a point where id like it toTrouble With Cross Section - Workaround?
Hello - our shop is new to Microvellum and we're struggling our way to shop drawings for the first time. In training with simple projects I was easily able to draw Elevations, Plan Views and Cross Sections. But now on a real job that is really complicatedMachine token - RoutedHole Array
Hi! I need to make a lot of holes in a panel but they are too large to be simply drilled, they need to be routed instead and i was wondering if there was a way to make an array with them, like its possible to do with the drilling operation. Thank youFeature Request: Selection Flyouts
(If this is already a thing, I just need to know where to turn it on) Right above this text box is a row of icons. If I don't know what any one of them mean, I hover over it and a flyout tells me. I would love to have this ability when I'm in the thickDatabase "Missing"
Recently we changed server "names" on one of our servers. We did not change anything other than the name. I am reconfiguring a Microvellum database using the updated server name w/ SQL Server and UWOD. When I Setup the connection for the Data CatalogSeeking assistance with a repeatable 'Master Data' concept across drawings
Dear All: We are investigating the integration between a MV drawing and an ERP system. The issue is ... The ERP system prefers to use the same ID for the same drawing element over and over again, whereas the drawings themselves always seem to have a newDynamic Product Images Spacing
When creating more than one dynamic product image in model space there is a set spacing of 200 inches in the y direction. Is there a way to change this spacing amount? I have a large product and the viewport windows overlap.How do you adjust a DIMDRAW token, so the dim lines stop short.
What im trying to figure out is sometimes I'll have a dimension in a section or elevation where I want one pick point to be higher than the other but trying to get it to do this in MV dimtokens seems like theres more to it. Ill have a scenario where iFinish Label Placement on 2D Elevation Drawings
Does anyone have a solution to why my PL1 finish labels are coming in at different heights on 2D elevation drawings? 2D drawing instructions are identical between these 3 products.FEATURE REQUEST: Create a Recycle Bin For Deleted Products
Many times I have accidentally deleted heavily modified products. As far as I understand, once a product is deleted—whether intentionally or by mistake—it is permanently removed, or at least very difficult to recover. I suggest implementing a Trash BinProduct Prompts UI - Add search box for prompts
Hi How about adding a search box for prompts when accessing thru product prompts UI? - Possibly add option to display prompts based on alphabetical listing?Next Page
Toolbox BSB Survey
Have you been using Toolbox BSB? We'd love to hear what you think!
MVU eLearning
Grow Your Knowledge
Follow along with RJ as he takes you on a journey to build your foundational knowledge of Toolbox.
Follow us on: