adding a .cutx file to subassembly
trying to add a customized subassembly to foundation libraryFEATURE REQUEST: Ability to Mass Edit a Comment Field in Overdrive Without Overwriting All 3 Comment Fields
I would like the ability to Mass Edit one Comment Field without overwriting the other two Comment Fields in Overdrive. Currently, when you Mass Edit the Comment Fields, you overwrite all three Comment Fields. If you don't understand that this will happen,MV Freezes As Soon as I Click "Walls"
Things have been running fairly smoothly since we got Microvellum in October. Suddenly today I started a new project and new room. I draw a polyline 96" long and then went to turn that into a wall. I got a spinny wheel for a second and then NOTHING wouldHardware Configuration / Visibility Problems
Any advice on hardware visibility in Microvellum? I’ve noticed that some hardware components (such as hinges and handles) are not displaying in my design, even though the part configuration seems correct and the hardware is assigned. Has anyone had aDrawing Walls in Microvellum using BricsCAD
When you draw a polyline and right click on walls and choose "Select polyline path for wall" and MV draws the wall and applies the dimension over the wall, the dimension endpoints are connected to the wall and cannot be moved like it could when I wasProducts fly across model space when i redraw
Hello, im pretty new to microvellum. I'm using redraw on products and they fly accross the screen, i think they go to their original insertion point. How can i modify a cabinet or panel and have it stay where it is. Thank youPick points added to section drawing
it would be handy to have a pick points option for drawing a section. i would use the the draw section views of the whole wall more if i didn't have to figure out where on the wall each section cut needs to beError Handling / Project Part Issues
Has anyone experienced this error in Microvellum? I’m working on a project, and when I try to select or interact with a part, I get this message. Even though the part should be part of the project, I keep receiving this error. Does anyone know what could2D Drawing Options "TAB"
I would like to know the steps for adding the 2D Drawing Options to "USER PREFERENCES"Solid Modeling "Custom Tools"
I searched the "KB" and found no article associated to the use of the "Custom Tools" Tab. Wonder if anyone has some insight to share?Is there a way to Copy wireframe lines off of the model and paste them as CAD?
I've been struggling with what "Draw 2D Plan and Elevation and Section" select to draw. I know these defaults can be tweaked but right now our team is only letting our drafting team head mess with those. And actually the tweaks I would want to make mayIs there a systematic way to straighten out/clean up a file?
This is how I want it to look. This is what my 2D Plan drawing is making. (This go around. It was different last week) New user here. I've been working on a wall with a base cabinet and shelving and fillers and panels and some non-standard things likeFormula Driven Spec Group
Hey all, I have been using formula driven materials since about 2017, and over the years have developed a method and philosophy so to speak on how to implement them into spec groups that simplify the workflow of spec groups setup, lower the barrier ofMaster Cabinets not showing carcass in 2D elevation
New user here. My standard library cabinets show up in 2D elevations but not the master cabinets for some reason? Any insight?Certain Products Not Showing Up in 2D Plan Drawing
When I go to Draw 2D Wall Plan View there are items not showing up on the drawing. I understand that its not going to draw CAD things I added. But I have built this bedroom wall that only has one base cabinet and the rest of the wall is built of MiteredMissing Rail on Drawing Tokens
Hi in one drawing im working on, all of the base cabinets are missing the top frame rails, how can i add them back in, i cannot see anything obvious or missing or broken in the design data, if i'm looking in the right places. Update* ive tried new buildsRollover measurements in decimals while keeping model space units in fractions in BricsCAD
How do I show rollover measurements in decimals while keeping model space units in fractions in BricsCAD? I want my dimensions to show as rounded fractions but when selected and my rollover pops up i want it to show my measurement as a decimal like toolboxIs my project toast?
I just got this error message when trying to draw walls: Please tell me there is a way to fix this without starting over. I've been working on this for 3 weeks. I found a Microvellum video on YouTube but RJ goes deep into detail about a very specificHow to Connect (Or Reconnect) Walls
I'm trying to draw my Plan View by Drawing 2D Walls and getting this error "Please select walls that are all connected." I have zoomed in as far as possible and dragged the corner snap points together, but after this I don't know what to do. Also - notNot displaying true route on part after we 2D the part
I noticed after I 2D a part and add certain custom routes (Vcut) When I update the part It isn't showing the true route however when I nest the part I can see the route and everything cuts as it should. I have also noticed this sometimes when using theMV Command Compendium
Is there a more complete list of MV commands than what is shown in the KB Article? It would also be super nice (from a nerdy perspective) to know when the commands were added to toolbox (version? date?) you may ask.. "but Ezra, why would you be askingBest Way to Draw a Plan View of ALL Walls and Products?
When you try to choose more than one wall to Draw 2D Walls Plan View you get the "Please select walls that are all connected." dialogue. Why is this limited like that? And can I get around it without making a separate drawing of each wall and then meticulouslyFEATURE REQUEST: Updated Product Prompts UI
This may be wishful thinking, but I think an update to the Product Prompts, similar to the image below would be extremely helpful. I would also like to see the added functionality of being able to access the drawing while the prompts window is open. PrettyExtend Finished Toe Kicks for Miter
I would like to have all finished toe kicks extended by a set amount to make it easier to miter the corners. I've looked in the globals and don't see a way to do it unless I'm missing it. Is this something that would have to be added to the length formulaUnderstanding hardware items in reports
Foundation: 25.1024 Build: 25.1.129.641 I need some help understand the relationship between hardware items and how/when they are included in reports. Scenario: 1) We added a bunch of faucets to our custom sink subassembly. 2) The faucet types are filteredBSB Panels and Ribbons
Got an issue that is making me pull my hair out. Currently using the Drafting workspace. I got used to the ribbon along the top of the screen. When ever I would pull up an object properties it would open the properties panel and I would put it on theExploded cabinets??
Hello... Not sure what happen or what I am doing wrong. All of my cabinets in this big project I have going on have gone into exploded mode / selection. When I click on a cabinet it doesn't select the entire cabinet. If I want to see product prompts andHinge Bore Visible Through Faces in Conceptual
Why is this happening? We have a client that wants a more Cabinet Vision/Mozaik look, but the hinge bores are visible through the faces. Even if I turn off the hardware layer, the hinge bores are still visible in the Conceptual Visual Style. This is withUsing Dynamic UCS (DUCS) When Adding Dimensions
We just published a new article that shows how to use Dynamic UCS (DUCS) in Toolbox BSB (BricsCAD) to place dimensions directly on 3D faces. If you’ve ever wished you could dimension a product without switching to a front view or side view first, thisDefault settings and Presspull on BSB
Hi everyone, I’m hoping someone can help me out. When I’m working with BSB, the value of VIEWRES defaults to 500. I’d like to set it permanently to 16000, but I can’t find any way to make that change stick. Every time I create a new room, it goes backFEATURE REQUEST: Ability to Adjust Door Overlay on Hinge Side Independently in FF Library
In the Face Frame Library, especially on the Master Horizontal Designer FF and the Master Multi Carcass Designer Cabinet, it would be great to be able to set the door overlay independently for the inside hinges and the out side hinges. The photo below2D Part Editor Menu
Is there a way to undock the menu so I can close it? one of my guys played around and I now cant access the close button, see attachedRendering options for BricsCAD
I was wondering if anyone has any recommendations for a rendering add-on for BricsCAD that will give us not quite photo-realistic, but something better than what BricsCAD offers natively?New PC setup.
I recently set up my new work PC and successfully installed the Microvellum software. I now need to transfer my personalized settings and configuration files from my old computer to this new installation. Could you please advise on the correct procedureRemove wall 2D Plan Dims
I want to remove the "Use_2D_Plan_Dim_Tokens" from all of my walls. I intend to manually dimension my walls in plan view Is there a global setting? Or can I save the wall setting to apply to the template? ThanksLocks Missing from Sections
Anyone else running into the issue were locks are no longer drawing in section views when you have add lock selected for door and drawers? Originally they displayed when we were setting up or foundation library as there was a prompt to drawblock. NowFeature Requests: Adjustments for 2D Drafting
We have been working towards being able to use the Foundation Library and there have been some basic drafting things that we have run across that we feel could be improved or updated to function better. Plan View: It would be nice if there was a clearCustom 5 Piece Door
Is there an existing CUSTOM 5pc DOOR in MV that would be like this? Or one that could be modified from. This is some more detail ... the 3/4" x 3/4" on the perimeter would be solid lumber that we would like to get linear solid wood footage on a report.Strip Lighting Notch
How are people dealing with this light strip notch when the using the dado construction on the top piece? At the moment we we just manually cut the slot on the saw id like to just have it done on the CNC though, any ideas how easy this would be to setIs there a way to reference Product Angle?
Hi, I am trying to fix where a DRAWDIM token is placing elevation dimensions, and I need to reference the product angle- because depending on if the product is rotated 90 degrees or not, the dimensions need to move positive or negatively. It doesn't seemNext Page
Toolbox BSB Survey
Have you been using Toolbox BSB? We'd love to hear what you think!
MVU eLearning
Grow Your Knowledge
Follow along with RJ as he takes you on a journey to build your foundational knowledge of Toolbox.
Follow us on: