Tabbing
I would like to suggest an upgrade to the current tabbing settings to allow for multiple passers and multiple tools.Open Position for a Microvellum Drafter
We are a commercial cabinetry and millwork manufacturer in central California looking for a full-time, on-site Microvellum drafter. Experience requested: MV7 AutoCAD Bluebeam Reading architectural plans CNC programming Pay is based on experience andFEATURE REQUEST - Option to Allocate ROLLS of Material (for fabric, vinyl, carpet, rubber, etc)
It would be GREAT if there was a way to allocate material out of a ROLL, rather than only having the option to allocate out of sheets. The material would still have an overall width and length (of the roll), grain direction, etc. But, when optimized,view cube keeps disappearing
when i am in the middle of drawing my view cube keeps disappearing and I have to go in to drawing Options and hit apply to make it show again a bit annoying has anyone else have this issue.Resizing item # BOX?
I would like to reset the size of the box for a project that has about 7 digits . The box around the numbers is a little small. I have searched but did not see what I was looking for .How can you copy a Project Phase from one Project to another
Just starting a new Project and it has alot of the same products as a recently completed project. How can I copy the entire phase from the completed project to my new one and have all the products work?Has anybody made a report to show face 6 tool pathing?
Our operators are constantly coming into the office with questions because there is nothing indicating what face 6 is going to cut. I'm looking for a report that looks just like the nest optimization report, showing all the toolpaths but for the face 6 program(s) and not the face 5 programs. I have zero experience making reports so I'm reaching out to the community to see if anyone has made this, and, if so, can I possibly get it from you? Thanks in advance.In Search of Microvellum Draftsman
The Koehler Company is an architectural millwork company located in Seguin, Texas (40 minutes east of San Antonio, 1 hour south of Austin) and has been in business since 1954. We are currently looking to fill in a position for a Microvellum drafter/engineer.Dealing with labels in a spray finish enviornment.
Just wondering as a tech for Microvellum, how users in a spray finish shop where both sides of a part have multiple finish steps, manage labeling parts efficiently. Do you use custom adhesives or skip the process of labeling these parts? Many improvementsWhat setting for single click editing in Microvellum?
I have spent some time looking into this and cannot find the setting? I have my Auto CAD settings as single click but when I go to change commands in Microvellum control panel it is a double click.Has anyone had issues with 'Fury' tongues in particleboard
Been having an issue with tongues coming off the nesting machine being quite rough and needing sanding before assembly. Using a 3flute 8mm spiral cutter . Has anyone had this issue or can help with advice that would be awesome :)More Formula Help
Trying to see if I can turn the bottom nailer on/off using this formula but its not working. I posted a similar question earlier. I'm just trying to have the bottom nailer activated when the base bottom is removed. Just can't seem the make the formulaAdd material name to G Code header
Hi. In our old system the G Code included the material name in one of the first lines, I was hoping to do that in Microvellum G Code. I have been in the custom headers configuration in the tool file in the integrated post processor settings under customAdding Prompts
I know this has been covered, but, I forgot. I need to add some prompts and not just to an existing cabinet but say to all the base carcass sub assemblies. Is there an easy method? I know, I know, but I forgot :)Cabinets 1/6" wider than engineered
Hello, My cabinets are being produced an average of 1/16" wider than should be. Working in melamine so the thickness of the boards are locked in. The gap tolerances seem to be good. Also when making drawer banks the drawers are too small for the enlargedCustom Spec Group Available...
Hello Community! I've put A LOT of work into my company's default spec group... I've reworked a lot of things to where it makes sense to me how the spreadsheets should work together... I've transitioned to inputting all the material choices (descriptions)Switching from 1/4" to 1/2" backs ?
I searched and am not finding what I am looking for. I this in the project wizard or the global?Need Microvellum to complete task
I really need Microvellum to focus and put Sterling Millwork at the front of the line this morning. I have been trying to get you guys on this since September and now we are out of time. Our Onsrud installer is getting ready to leave and I have a backSuspended Cabinets Top Cleats
Even though I have the box checked to raise the top cleats, nothing happens. Is this something someone can point me in the right direction to fix or should I create a ticket?Looking for Millwork Drafter in the Austin area
Millwork Designer & Drafter Escobedo Group is a multi-faceted general contracting company, made up of a high-energy team of creative professionals focused on precision & innovation within multiple divisions of design, stone, steel and millwork fabrication.Production Designer Australia Sydney
PRODUCTION DESIGNER About us We are a dynamic and growing Building & Joinery company based on Sydney's Northern Beaches Australia. We cater to clients on the beaches and throughout Sydney in both the Residential, Commercial and Hospitality sectors.Hide products in the product list?
Is there a way to hide products that have been dealt with on this list? After having a couple hundred products and some that have already been produced , I would like to "hide" the ones that have already been produced.Dynamic Materials Grain Formula
Good Morning, I'm working on setting up some dynamic materials, so far so good. I'm just working on a naming convention for the materials. But I also want that naming convention to drive some attributes ... what I'm stuck on is the Grain Formula. I can'tWelcome to Me!
Good morning to all, Excited to announce that I downloaded my first Microvellum software last night and am eager to get started and looking forward to working with as many of you here as possible. I am a cabinerd since 1995 and know the industry. WeNew release available today: Build 21.1.0127.641
We are pleased to announce that the update to build 21.1.0127.641 is now available! This maintenance update provides users with access to Toolbox 2021, the latest release of our AutoCAD OEM platform. This build also officially supports full version AutoCADDADO Clearance at SMA
Happy Friday Everyone, Wondering how do you guys tackle the issue of dado clearance with Solid Modeling Analyzer? Let's say we have a .5" thick material dado into another material, I'd like the dado width to be slightly bigger at 0.51" wide. Is thereOpen Position: Microvellum Engineer/Draftsperson
Architectural Millwork Company in New Jersey, seeks an Experienced Draftsperson/Engineer. Experience in higher end residential cabinet/millwork construction is preferred. Experience in Microvellum, AutoCad, MasterCAM, Autodesk Inventor, will be a plus.Does anyone know how to change the text in a value reported from a field?
I have a title block that is all done in Times New Roman, but values reported from a field are what appears to be arial. I want to change them to Times New Roman. Does anybody know how to do this? I can't seem to find it in autocad help, or in youtube.Blind cabinet notch
Trying to get rid of the mouse hole created by the MV machining for notched Blind Panels on Upper Blind Corner Cabinets. Where is the control for that machining? We prefer to square by hand. We are using library v45. Thanks.Having issues with rear modifications
I have 3 upper cabinets next to a hood and the client wants ductwork to run through the uppers to vent outside for the range hood. I use the top notch rear modification to do that and set my size but I am getting a few problems. It is not notching theunwanted additional pointers with every import
I get unwarranted doubling of pointers when I import project from home to office network which leads to confusion in the material file. How do I avoid this in the future.Router Set Up Sheet?
We have 2 routers with a different number of spindles. Therefore we only set spindle 1, 2, and 3 with a specific tool in that spindle for both machines. Spindles 4 + the tool can change as needed on a job. Does anybody know how to write a report thatActivity Token not Valid - Workbook 'S'
Library 50_3 and 48_0 I am having an issue where when using the 50_3 library I am continually getting an Activity Token not Valid - Workbook 'S' error when creating a new workorder with any cabinets. When using our older 48_0 library I don’t get thisFunctions I Didn't Know Existed - PARSETEXT and VHLOOKUP
This is really just a heads up for anyone that, like me, had never browsed through all of the Functions in the function list in Workbook Designer. I just found out that these 2 functions exist, and they will really help with a lot of the complex formulatingMicrovellum & INNERGY Educational Sessions
I wanted to invite you all to the free educational sessions (not software centric) we are offering at our Virtual Summit this week. There is no cost involved for this track. All you need to do to register is go to the registration page: https://www.innergy.com/summit-registrationPart/Full time Microvellum drafter
Hi, The New Traditionalists and ducduc located in Connecticut are looking for passionate and skilled microvellum drafters to join the team! We create a variety of products from children's furniture that ranges from flat pack to custom projects and createSaw files in Work Order Folder
Submitting this Idea for a user (John Savoy @ Phoenix Millwork) He would like if the Saw Optimizer Output files were placed in the Work Order folder the same as the CNC output files. Right now they are only sent to Secondary Folder Locations that the user has to setup. Thank you,machining
Bonjour . dans ma CNC j'ai plusieurs mèches de 5 mm et 8 mm , mais j'ai remarqué qu'il y a seulement 1 mèche qui fonctionne à la fois , est ce que c'est le cas chez vous aussi ou bien ça descend plusieurs au meme temps ? merciSMA parts not converting right
Hello, do you guys have problems with SMA not converting the parts correctly. Some of them are right, some of them are only panels even as in 2d the machining is present, just wont generate right in 3d. So hoping is just a setting somewhere. Thanks.Spread sheet column headers not lining up.
Is there a way to fix this so the column headers line up properly above the data? ThanksNext Page
Toolbox BSB Survey
Have you been using Toolbox BSB? We'd love to hear what you think!
2026 INNERGY Summit & TechCon
Agenda Released!
MVU eLearning
Grow Your Knowledge
Follow along with RJ as he takes you on a journey to build your foundational knowledge of Toolbox.
Announcements
New Toolbox Release Available Today: Build 25.1.1218.641
We are happy to announce that Toolbox build 25.1.1218.641 is now available! This build includes resolutions for issues with the Part Properties interface, 2D elevation tokens, the "Rotate Parts in Nest" feature, and more. A new feature has been addedNew Foundation Library Release Available Today: Build 25.1121
We are happy to announce that a new update for the Foundation Library, build 25.1121 is now available! New releases of Microvellum's Foundation Library include resolutions for numerous issues, numerous enhancements to existing products and variables,New Toolbox Release Available Today: Build 25.1.1204.641
We are happy to announce that Toolbox build 25.1.1204.641 is now available! This build includes several new features added to enhance the usability of the Toolbox login and About Microvellum interface. Additionally, the "Rotate Parts In Nest" featureNew Toolbox Release Available Today: Build 25.1.1120.641
We are happy to announce that Toolbox build 25.1.1120.641 is now available! This build includes resolutions for issues with various parts of the interface, errors associated with redrawing products, copying data, and Microvellum's Beta Optimizer. PleaseNew Toolbox Release Available Today: Build 25.1.1107.641
We are happy to announce that Toolbox build 25.1.1107.641 is now available! This build includes resolutions for various issues with the Beta Optimizer, subassembly names and prompt values, extruded products, and more, as well as improvements to certain
Follow us on: