Report Groups wont process all reports
This was a small issue in OEM but its a bigger in BSB, if it doesnt crash, then it just doesnt process my reports, i might get 1 out of my chosen 6 or so, if i'm lucky. I found that the move to BSB broke something and it was looking for referenced reports
Feature Request: Combine Work Orders
The ability to combine already set up work orders, without the need to choose specific parts because its already done, so it can then combine all the parts for nesting together. With the current set up it way to hard to go through and choose which cabinets
BSB Publish error
Everytime i try publish from BSB i get this error, anyone have a solution?
Status Update: New Sawing & Nesting Optimizers
Hey, Microvellum Community! I have some good news to share with you! As many of you know, our development team has been working on a complete redesign of our saw and nesting optimizers. This isn't just an enhancement of our existing optimizers; it's the
G!Filler_To_Floor is this a missing global variable
Just started messing with the Foundation library. Ver 25.0813 the Scribe filler sub assembly is referencing a global variable, but it is not there. Is this missing or is the Subs reference incorrect?
Solid Modeling Tools - Extruded Entity Reveals/Heights/Removable Panels
I'm trying to get into Solid Modeling Tools for producing die walls. I think I have a handle on the basics, but I'm wondering how to do some more advanced edits. How do you all handle removable panels on your die walls? For our removable panels, we use
BSB file do not open after complex Sweep operations.
Hi everyone, I'm working on manufacturing a complex crown moulding for a project, and BricsCAD's Sweep operation has been doing a fantastic job—honestly, even better than AutoCAD in this case! However, I’ve run into a serious problem: After saving and
BSB Toolbars
How do i get the measure tool on the top toolbar, i have absolutely had enough of going back and forth between the modelling and drafting just to measure something and or then change the view type from wire to hidden etc.
MV Training Events – Learn about Toolbox BSB
In case you didn’t attend our Office Hours meeting the other day, here’s an update on what we got coming up. With the launch of Toolbox BSB (BricsCAD), we recognize there’s a need for more information and opportunities to learn what’s new in the software.
Local Workbook - Missing Column Names
Team, I am missing the column names as shown in the Training Video:Wood Hacks: Spreadsheets (Part 5). Is there something I need to do to see the names? See the attached pictures.
Wood Drawer Box with no Machining
As the title says, I'd like to only cut the borders of my wood drawer parts that are typically dadoed together. It's easier for my guys to run their own dados on a table saw that is always set up for drawers after being on the CNC. I tried setting the
Remove Back in the Design Workbook - Keep Pelmet - Base, Tall and Upper
Team, I am setting up the framework for a new cabinet line. The baseline is meant not to have backs - see the attached picture. How can I achieve that in a Global setting?
Feature request/user testing for PLINE converter tool
Most people are aware that using the draw in 2D command lets you draw vector shapes, lines, arcs, etc. on a part, which then creates one or more machine tokens in that part's properties with all the point data from the drawing. A lot of users will also
Feature Request: Optimize Project Export – Eliminate Redundant Hardware Graphics Packaging
Overview: Exchanging projects between users, support technicians, and service providers is a very common workflow. Typically, projects are zipped and shared via email or file transfer. However, the current Export Project utility creates significant obstacles
Has anyone made reports for 5pc door hinge boring?
This is always an issue for us and end up just hand writing the hinge placement on our 2D drawings for the guys in the shop. It would be awesome if there was a report for this using prompts. I was seeing that there is a Z value in the spread sheet using
Feature Request: Option to Disable Associative Hardware Drawings to Improve Performance
Overview: User feedback consistently identifies slow draw time speed as one of the most significant drawbacks of Microvellum. Internal time studies on the Foundation Library confirm that hardware blocks included in 3D product drawings have the greatest
Drawer Face Position Name
It was brought to my attention from production that the drawer front faces no longer say Left / Right for there position on the cabinet for a 2 door-2 drawer or any side by side drawer. Why was the name removed in Foundation? The Component Library had
Feature Request: DRAG and DROP
Is the "Development Team" considering implementing Drag and Drop of products, for use in BSB OEM?
SMT's on Restart/Redraw
🤔Now this is interesting I went to redraw a simple L shape construction path. I used the normal process to restore and it wont redraw???
FEATURE REQUEST: Elevation and Section Redraw Options
Currently, for redrawing products we have options for: 2D Plan Drawings, 2D Plan and Elevation Drawings, 3D Drawings (Minimal Machining), 3D Drawings (Minimal Machining and Shelf Holes), 3D Drawings (Full Machining). When redrawing the products it will
Network Performance Issues
After posting a question in the focus group webinar that just occurred, I got to thinking about the response from the Microvellum team. My original question was asking whether Microvellum had any plans for local caching of data to help speed up certain
Feature Request: Improve Visibility in Insert Function (FX) UI – Adjustable Column Widths
Overview: Updates last year to the Insert Function (FX) UI have improved readability of formula results, which now display without being cut off—a much-appreciated enhancement. However, these changes have introduced a tradeoff: reduced visibility for
Through cuts
We are trying to get through cuts and can't figure it out. We were using brad point but the edges on the bottom side are not good enough so we got the through point bit from Frost but when we try to set it to -z.20" it doesn't cut all the way through.
How to Delete Specific Blum Antaro Drawer Heights
Hi Gang! I would like to delete Drawer height K and D-Double Rail from Antaro Drawer Height options. As you can no longer buy them in AU. I've looked through all the spreadsheets and design data and can't find what I'm looking for/too scared to change
Feature Request: Bumping to outside of Applied End
Would be nice when we used the Bump Cabinet command it would bump to the outside of an Applied End
SMT
I would like to know if anyone has created a way to allow a plate to be extended. Working for a shop that wants to incorporate (tongue and grove) to one floor plate in field joint? I have to, at this time, use the tools to extrude and lock the tongu
Section drawings for the Zbox and Zargen
Would be nice to have section views added for both pieces of hardware in section. Currently doesn't show up and looks odd with no hardware.
Small Scale Prototyping
I've been thinking about getting a desktop laser cutter to make small scale prototypes of things like reception desks and other custom products. Has anyone tried this? What machine(s) have you used? Any success stories, major hurdles or suggestions welcome.
Edit Formula box in Workbook Designer
Would love to see the edit formula box available in Workbook Designer.
Edit toolbars in bsb
I have a tool bar set on my drawing palate in bsb foundation it has 35 tools on the tool bar. I require 8 and have no need for the rest. Can the tool bars be edited so it is smaller and only has the tools I would require. Cheers Scott
Root Element is Missing
Hi everyone. I hope you can help with this problem that I encounter just now. I was just doing a project when an error suddenly pops-up. The Toolbox closes and now this error is showing up when I'm trying to re-open the program. Here's the error scr
WoodWOP/Cutrite Multiple Pocket Configurations
We have a Homag nested bed that I use WoodWOP pockets made by CutRite and would like to stick to doing that (We run phenolic and the DXF MV spits out has flat machining, so my tool is just going full depth into phenolic) My issue is my other nested bed
New Toolbox Release Available Today: Build 25.1.0826.641
We are happy to announce that Toolbox build 25.1.0826.641 is now available! This build includes resolutions for issues with perfect graining and part placement, as well as various issues surrounding database usage, such as data association, copied product
New Foundation Library Release Available Today: Build 25.0813
We are happy to announce that a new update for the Foundation Library, build 25.0813, is now available! New releases of Microvellum's Foundation Library include resolutions for numerous issues, numerous enhancements to existing products and variables,
Long Material name runs into yeild on nest
Is there any way to rearrange the text below the nest in the composite dwg. My material name sometimes gets too descriptive and runs into the yield %. Do not really need the yield displayed.
lables error
all of a sudden this error popsup when i go to print labels. i think it started when i modified the label in brics cad but this error only comes up on toolbox autocad
Feature Request: Product Image Scale Size
Feature Request: The help image for products should scale to fit the opening.
Turning Valance from being processed but still draw/show
We typically just run our valance parts as 8' runs and our installers will cut as needed. I want the valances to still show and draw in our 2d sections but i dont want the part to process on the CNC. I know theres a few work arounds to accomplish what
Hanging Rail DWG file
Hello MV world! I need to substitute the default Hanging Rail drawing with the actual one we use in our company. Ideally I just want to swap the current 3D drawing to the one we use, keeping the origin the same so the formulas stay intact and the product/drawing
SOLUTION REQUEST: Have SMT Create a Layer Specific For Construction Paths
I thought there was a post about "rebuilding products from an existing session" on here, but I can't find it. Or perhaps, the question came up during the IWF Connect - SMT session. Either way, the question was in regards to construction paths; something
Next Page