Microvellum Knowledge Network
Drilling disappearing when adding a route
Can someone please see if they can work out why, when i add routing out holes into a panel, it turns off the drilling for my divisions when i go all the way through, but if i stop it 0.1mm short like rebating it, the drilling stays attached & doesn'tSet 2D Instructions Section Dims permanently to scale at 1" = 1' - 0"
I am wondering if anyone has been successful at having their Section Dims only show up in one Annotative scale while drawing in model space at 3/4"? Can it be done in 2D Instructions? Always need to manipulate the scale list to achieve the scale I wantCorner Notching
Can anyone tell me why when i add a corner notch into a part, it wants to pocket the part rather than cut out the corner out in one cut?Redraw at a large scale
Hi community, how can I redraw select rooms or even an entire project at once to match a large scale change? Such as a change of pulls on an entire building?More Options for Walls
It would be nice if we had the ability to add more windows and doors. Also, It would be cool if we were able to add backsplash on the walls and set the thickness, height, and width. It would also be nice if we could add outlets on walls to make sure itLines not showing as blue when selected?
Hi, In my Toolbox my lines aren't showing as the standard blue so it makes it difficult to see what lines are selected. Selectioneffect = 1 & Hardware Acceleration in the graphics config is on and it is still not working so it seems like a Toolbox issue.Hingeplates
Does anyone know how I can change my default hingeplates on MV? It doesn't seem to appear in the globals or in the material hardware Spec Group. It is seeting all of our default hingeplates incorrectly.Nosing Filler thickness not subtracting from gables and no crown nosing filler option on upper cabinets
Hi, I'm working on a project where we area only using nosing fillers on all of our cabinets, when I select the nosing fillers within the product it is not subtracting the nosing filler thickness from the gables so I'm having to manually do so. I was wonderingShadow Line Finger Pull machining location? Machine tokens not showing up in Part Properties Help
Hi, I am trying to work out how the shadow line finger pull machining gets added to the left and right gables, I know when you go into the shadow line subassembly you can turn off the left or right machining but I cant find anywhere where the machiningAdding Sink To 3D Countertop
I would like to add a sink, or even just a sink cutout, into my countertop so that my 3D views will accurately reflect what my client is wanting. How can I do this? Thank you!TURN OFF ALL DIMS FOR 2D PLAN, SECTIONS AND ELEV
IS THERE A WAY TO GLOBALLY TURN OFF ALL DIMS AND NOTES FOR 2D PLAN, SECTIONS AND ELEV?Estimating Module
Can "Formula Driven Materials" be used for estimating a project? ALSO: In the Project & Estimating video session I did not find info on "the ability to limit access to specific areas of TOOLBOX". Did I miss it while viewing all the videos??Adding Custom Door Profile
How can I add a custom door/drawer profile to a project? The designer changed the profile from a standard shaker style to the one I'm going to attach to this post. Can anyone help me make this? Thank you!Viewport Scaling
Does anyone else have this issue? I draw in 1:20mm scale and use Annotative Dimensions and Text. When drafting in paper space I change the viewport scale to 1:25 and the dimensions and Text overlap and screw up. Is there a setting I am missing? I haveHow to Call a Value Without Looping It
I have a public formula I made which requires values that comes from my prompts. I have left_count = 1 middle_count = 0 right_count = 1 I need these values to come in as 1,0,1 which works if I plug that in to test it. When I plug in the actual variablesReport Designer Data
Does anyone know of a way that I can make a formula that analyzes all the data in a loop ahead of time and compiles the loop into one string like : Carcase Left Drawer Box Right Drawer Box Adj Shelf, that way I can analyze the entire string for amountElevation has a random white square...
Like the title says the elevation for a new product I've created has a random white square that i can't find the source for. There is also the width measurement that is obviously not taking my set offsets and i cannot find the source either. I've includedCreating a Formula Field
Where can I find the formula field section in the Report Designer?Can't Work On Any Reports
Every time I click 'Designer' tab after I open a report, nothing happens and my report goes away. Anyone know how to fix this I restarted my computer twice:PRIMARY filegroup is full
Hey everyone, May I ask if anybody has an idea regarding this error that pops up when I'm trying to drop a project from the library? It says, "Create disk space by deleting unneeded files," but we have a lot of free space on our Disk. Any advice willDimension leader line help
I can't figure this out, see image below. When drawing sections the dimension leader on the right (Circled Green) is about 2 3/4" longer than the leader on the left (Circled Red). It's the same whether you draw the section from the left or right, it'sWarning dialog about MV template text styles, dim styles and layers missing
I use keyboard aliases (the "acad.pgp" file) a lot. For the longest time, I have had "D" assigned to the Distance command, but now I get a pop-up message saying: This drawing does not contain the needed text and dimension styles or layers. They will beLegrabox N Height 500 Runner Length not appearing
Why the hardware sides is not appearing on this size of runners Legrabox? N Height Runner Side LegraboxChange Layer Color Of Cabinet
The layer of my cabinet changed for some reason and I'd like to change it back. Before: After:2D not matching 3d cabinets
HI All, I am having an issue when I make a section of a base cabinet it will not hold the cabinet off the wall 1/4" even though it is setup in the prompts to hold the cabinet off the wall 1/4". The 3d model is working just fine and holding off the wallMVSUBASSEMBLYPROMPTS command not showing the exact subassemblies
Hi everyone, I just want to ask for help regarding on our MVSUBASSEMBLYPROMPTS that's not functioning just like our other computer with the same Microvellum Toolbox. When we're trying to check the products subassemblies via MVSUBASSEMBLYPROMPTS, It showserror "the selected solids are not affiliated with any products in this builder session"
Why does this keep happening? Almost all the time all my parts do this, and I have to start over because I can't use any of the solid modeling tools on my pieces. Thes are added through the extruded parts menu and layers are added to them. After doingViewports keep resizing
When working with 2viewports they keep resizing to regular size after I do a command. This is really annoying as I have the right view port smaller than my main view port and I am getting sick of resizing every time I do a command. This is with the solidAfter purging 3D products now coming in on white layers
Is there a way to reinstall the layers. I have purged with no products in the drawing and now when placing products they all come in white in color.Foundation 25.0124 Door Center Panel
What is causing the center panel to not be visible? It shows up in 24.11272D sections are not holding cabinet off the wall even with the wall offset setup in prompts
HI All, I am having an issue when I make a section of a base cabinet it will not hold the cabinet off the wall 1/4" even though it is setup in the prompts to hold the cabinet off the wall 1/4". The 3d model is working just fine and holding off the wall3D Objects Are Plotting In Color
Hello, I'm having an issue where my 3D views are plotting in color, instead of black and white. My ctb file has all indexed colors set to black so I'm not sure what the issue is. I just started to add perspective views to my drawings today, so I'm notLooking for entry door library
Hello I am looking for entry doors pack.Cabinet rails no longer function
As per the title the cabinet rails have failed to properly work on most of the units i draw which are all face frame based since the last 2 or 3 updates. I believe the problem lies with this new vertical front rail that has been added, i keep seeing it,Subassembly Save Location
Where do I find the subassemblies that I saved to the library? I'd like to go in and delete one so I can reuse the name.Adding a Drop-Down Box Into Prompt
How do I change my 'Drawer Box Depth' into a drop down? Right now it accepts any value but we only have box sizes 9|12|15|18|21|24|27|30. I'd like to create a drop down box with these values.2D Drawing for Applied Moulding
We created our cabinet doors in Library Specification Groups D! Workbook. Now when calling for 2D Elevation drawings the Applied Moulding doesn't show. Do we need to add 2D tokens for this? I tried adding DRAW2DBOX but this doesn't even give the miters.item # scaling
I'm setting up standard scaling moving from annotative. I have everything working correctly except the item number which comes out very large. Anyone no where the variable is that controls this? I'm in the latest version of the foundation library ThNo machining for drawer adjusters
I have recently converted to the foundation library. The first project I drew has a bunch of drawer cabinets, and we use drawer adjusters. I believe I have set all of the appropriate prompts in the library for the drawer adjusters, but I don't get anyRemove additional lines from elevation?
I need to remove the lines that are coming out in the elevation for the ada unit. The prompts for a toe kick are turned off but in the elevation its still showing the toe kick.Next Page
Product Engineering Team Meetup
Join us for next Product Engineering Update Review
Gain an up-close view of the enhancements, additions, and modifications within the Foundation library and available expansions.
Register
MVU eLearning
Grow Your Knowledge
Follow along with RJ as he takes you on a journey to build your foundational knowledge of Toolbox.
Follow us on: