Bad G-Code results
We have been getting some bad g-code results lately. In the attached, the first panel is the current (original) nesting setmill modifications and what I think it needs to change to. The center panel is the results without any custom modification. LineAdding Pocket Cut via Draw Part in 2D
Has anyone else noticed an issue with the pocketing via Draw Part in 2D. I need to add this machining manually, however, it is not calculating it correctly. I want to use a 1.75" dia router bit to cut the pocket, however, it is placing it only 0.5625"2 Door Blind Corner Cabinets - Foundation Library
I have noticed that the Foundation library does not have 2 Door Blind Corner Cabinets like the Component Library did. How have others fulfilled the need for a 2 Door Blind Corner Cabinet in the foundation library?Product detail report
We just started using the new Toolbox BSB & I've noticed the product detail reports don't show an image of the product anymore? In the previous build I believe 2 out of the 4 product report options showed these isometric images which was handy for someKeku clip issues with machining
We are trying to implement Keku clips into these cabinets. We've done well before with the ADA ones but when he tries to put in the clips on this one, the machining for the holes disappears on one of the axises (or axi?). Could someone please give meCustom Part Toolpath Failing
Can anyone give any insight as to why the toolpath for this part keeps failing (not generating at all)? See the part with the hatch in the picture. There was a part originally created by SMA. Other parts like it worked while yet others I had to redrawTrash Bin Logo
Greetings, I recently modified a trash bin and added circular routing for the trash bin logo. The box was at 26" and once I changed the width, the logo moved right along with it. How do I keep the logo in the center of box?CNC VCUT - Laminate Chipping
Hi, How does everyone avoid laminate chipping when machining the mitres on CNC? Have not had much success Regards,missing rooms
We have a very large project completing over a 2yr span. Engineer opened it and on the autocad side there are only categories and in the product list side there are only rooms but no categories. Anyone come across this before?Feature Request: Implement a “Project Designer” Functionality Using Library Designer Codebase
Overview: The development of a new “Project Designer” tool is recommended, modeled after the existing Library Designer. This feature would allow users to make targeted modifications to products and subassemblies within a specific project, without impactingNesting Parts with Consistent Veneer "Flame" Direction
When nesting on veneered sheet goods cabinet parts, especially sides, the mirrored components will often not have a consistent orientation. This can result in one side being "flame" up and the opposite side being "flame" down. Having a way to designateFEATURE REQUEST - Separator Bar in Prompts/Wizard
We would like it if there were an option to add separator bars (or something similar) in Product Prompts and Wizard interfaces. This would help us group by categories within a tab. Currently, we use colors, which work ok, but we would prefer colors to reference the "type" of variable (green for "drives cost", red for "hardware related", blue for "banding", or some scheme like that) and have the separators to define the groupings. Not a priority request, necessarily, but could be a nice feature.Legrabox Default Side Colour
How do I change the default Legrabox side color to grey?Show/Change Current Specification Group on Toolbox Menu
I'd like to know the current spec group, and/or be able to change it on the fly. Is it possible to add something like this to the Toolbox toolbar? I think it would be especially helpful when using SMA. Our formula materials depend on the spec group beingCutout Route varies when nesting
Hi All, I am applying an idential cutout machine token to the left and right side of a cabinet. When nesting, Left side creates a seperate vertical route Right side incorporates it into the perimeter route Everything looks identical as far a i can tellNew material not working correctly?
I copied a stock material to the project level and change it's material to .73" from .71875". Then I swapped the material in the project spec group. When I redaw everything so that the new material will take ALL my machining goes away; line bore, dado[Feature Request] DRAWPOLYLINE doesn't have an Offset parameter
Tokens for both Virtual Routes & machining tokens both have an Offset parameter, but for some reason the 2D token for DRAWPOLYLINE doesn't. Could this get added in? It'd make drawing complex shapes on cross-sections easier, especially in cases you'veAlways Make Specific Part get Cut by the CNC
Is it possible to always have a specific part of a product cut by the CNC? We have a beam saw and CNC and sometimes the engineers forget to have the CNC cut the more complicated parts.Toe Kick Notch Relief
Right now, the Toe Kick Notch Relief Left and Toe Kick Notch Relief Right do not look to see if you are adding a FE. If you are adding a FE, you would not want this extra cut. Please update the formula to look at the FEs.Blum Metabox Drawer
We are testing the Blum Metabox for a client specification, we've not used them before. On our test cabinet, we've had issues so I want to ask some questions. Our first problem were the holes for the expando inserts, they came out at 16.6 mm instead ofWrapped Batten
We have Wrapped Batten checked and a width entered, yet it is not appearing on any cabinets. We are hoping to use it as an "inset top facia" for base cabinets with larger top reveals; we do not want to cut into the top or side panels. Is this the bestGrain Matching in BSB not working properly
Parts that should be grain matching vertically in a single cabinet are not. Material is set as grained. Perfect Grain is on. Split doors from drawer fronts is set to 0 as well as split double width cabinet. Allow Grain Matching across multiple cabinetstall door, center hinge location when fixed shelf is also centered
Software build: 25.2.227.641 Library build: 26.0112 When I enter a 90" tall cabinet, and it gives me five hinges, and I select a fixed shelf, the middle hinge is centered on the door, intersecting the location of the fixed shelf. There are conditionalRouter wrong side of line
What can cause this to happen? Ive used this piece of hardware for quite some time, and havent touched the token, ,,,,, When i draw the part in 2D, It shows Tool on the correct (Right) side of the polyline For an internal Socket rout, but when i nestStay-Down Setmill Location
I'm familiar with changing the setmill location on a nest, but is there a way to change the setmill location on a stay-down nest? Using the setmill change on the Edit Nest tab, it jump back to original position on nest update.Adjustable Closet Rods
I added a couple Adjustable Closet Rods to an open Cabinet. The top Rod needs 2 holes 5mm - 32mm apart and the second closet rod needs 6 Holes 5mm - 32mm apart. I tried to add a machine token to the rod but i cannot get any holes. Can someone help withScrap Saving Tool
For anybody who uses the scrap management feature in the MV optimizer: Let's say I have 10 WO's processed for a specific project, and I've been using scrap from each WO every time. Now let's say I have notice an error in WO 5 that I need to fix and reprocess.Upper Nailer Rebate
New to the foundation library. I want the upper nailer rebate to be 11/16" wide, and routed with a 1/2" bit. In my previous version I was able to accomplish this easy as I just added the machine token to the Upper Top Nailer in the Carcass Upper sub assembly.Add or copy multiple machine tokens to clipboard at once
I often find myself copying or adding multiple machine tokens to the clipboard, one at a time. It would be a huge time saver to be able to grab multiple tokens at once and send them to the clipboard, or add them to a product from the clipboard. PleaseBUILD 24.1.815.641
Can anyone provide me with a build. 24.1.815.641 or any newer build in the 24 series?Face 6 programs/Lables
im having a bit of an issue, seems to only happen on corner units (that i can tell) I print lables for parts with face 6 drilling, as usual... so the cnc operator knows what parts need it and which axis to flip the part.... our issue is, the lable pictureRepeating barcode
I have a "Gremlin" its been happening for a little while this Barcode Number "08VEAE01" Keeps Repeating.. I have tried to replicate it and it wont replicate where two different parts get the same name... but that same does appear in my test. I'm not sureAssociative Machining across multiple products
Hi All, For our toe kick lighting, we create a dado along the entire length of the run off cabinets and install a recessed light extrusion. For the MV strip lighting insert, it only creates a dado on the bottom outside (image below) I am looking for anWhy are my doors and parts not rotating correctly on composites?
When using grain i would like the rotation of my doors, sides, etc too be consistent. What is causing this not to be? Is it something MV is capable of doing, or am I asking for too much? Currently have to go through my nest and rotate by handFormula Help
Good Morning, I'm trying to set up an Alert or two regarding tall cabinets and rollout shelves. Is there an "includes" or "contains" command that we can use in Microvellum? I haven't found anything that works. I'm trying to formulate something similarExtruded Die Walls
Can we get double top and bottom plates added to the extruded die walls? These walls are great, would just love to see this added to prompts possiblyFeature Request : Maximum Tool Depth
I would like to see an option in the toolfile that sets the maximum cut depth. We have some tools that can only cut 1" deep into material. We recently had sliding closet doors that are 1.25" thick. The locks we had in these doors called for a tool thatStrange Behavior after 25.2.114.641 Update
Are any other Toolbox AC users experiencing strange behavior after the recent update? Specifically, the duplication of S! workbooks and subsequent failure of Globals that reference prompts in those workbooks?movento drawer side lead in
Hey all just wondering if anyone knows how i can change the lead in location on the dado on movento drawer left side because the issue is we can see the lead in when base is in and looks not right. the right side is good its at the bottom. see screenFeature Request - Add Snapshot of Face of Nested Material to Nesting Report
Now that Microvellum is working on applying Render Materials to Database Materials, I would like the face-up side of the material to show on the Nesting Optimization Report to help the machine operator ensure that the material is placed on the CNC withNext Page
Toolbox BSB Survey
Have you been using Toolbox BSB? We'd love to hear what you think!
MVU eLearning
Grow Your Knowledge
Follow along with RJ as he takes you on a journey to build your foundational knowledge of Toolbox.
Follow us on: