Adding 3d Pull/Handle in Foundation Library - Issue with Hardware Showing in Drawing
I am trying to add handles/pulls to my foundation library. I believe I have it all correct, and I have the holes drilling in the correct position. But I can not get the 3d drawing to show up for the added hardware. I copied and modified a current handle
Show/Change Current Specification Group on Toolbox Menu
I'd like to know the current spec group, and/or be able to change it on the fly. Is it possible to add something like this to the Toolbox toolbar? I think it would be especially helpful when using SMA. Our formula materials depend on the spec group being
Report Default Variables
This may apply to other reports as well, but for example the "Cost Based Estimating Report". When the report is opened there is a variable panel on the left side with Markup, Overhead, Tax, etc values as well as other checkboxes to easily modify the report.
eWrongDatabase exception at
I'm having this error pop up and i'm not sure what its trying to tell me, i see its saying wrong database something, but how can i pin point to the actual issue? Thanks
Parts List Modification
Is there a simple way to add materials to the Parts List?
Isometric Shop Drawing
I am relatively new to this, I have been thrown in the mix and told to figure it out. I want to create an isometric shop drawing that is just a line drawing. Is there any way to generate one from the products that is not shaded? I really don't want to
Global prompt control for turning off Reveal dims in sections
In the 2D Instruction for drawings there are a Top/Bottom Reveal dim in the section drawings. It would be nice if these were tied to a global prompt to turn them on/off as a default. When adding tops and other information to base cabinets the reveals
Cutout Route varies when nesting
Hi All, I am applying an idential cutout machine token to the left and right side of a cabinet. When nesting, Left side creates a seperate vertical route Right side incorporates it into the perimeter route Everything looks identical as far a i can tell
Converting to new library
Currently in BSB, but Imperial Component Cabinet Library v050.7. Need to get old library into new Foundation library so we can us the updates and addons. Looking for suggestions to move our cabinets from our current library into the new library.
[Feature Request] Wipeout 2D Drawing Token
It's been requested several times before, but it really would be useful to have this in the tokens, especially when something needs to be hidden on cross-sections without having "Use drawing tokens only" needing to be toggled on and off every time
New material not working correctly?
I copied a stock material to the project level and change it's material to .73" from .71875". Then I swapped the material in the project spec group. When I redaw everything so that the new material will take ALL my machining goes away; line bore, dado
[Feature Request] EQ Functions working for 2D drawing tokens
Currently EQ functions don't work for drawing tokens like they do with parts. When needing to draw additional 2D to accompany those parts however, that gets obnoxious, since by definition EQ functions are an infinite array & drawing tokens aren't.
handle is in the wrong position
i'm having trouble with the microwave cabinet in the FD it places the handle correctly every where but the section drawing. how should this be fixed without messing with the door subassembly?
How do change the labor rates in the "Cost Based Estimating Report - Shop Quote Optimized Option" - Stimulsoft Design Report
I am running Toolbox OEM 2025 Build 20.1.616.641 What I have tried Company Setup --> Factory Variables --> Cost Based Settings --> Labour Rates Workbook Designer --> F Sheet --> Prompts --> Change labor rate in coloum M Row 1 - 11 Workbook Designer -->
Unable to submit Case
I'm trying to submit a Case Type: Software Management question and the Case portal just locks up once you hit Create case and never submits anything. Any one also have this issue?
Duplicate Cabinets returned & Random Geometry
As per the title ive been experiencing duplicate cabinets again, a version that is usable and a version that is broken down into single components not grouped and doesnt update and requires deleting. I'm also getting this sort of thing happening with
[Feature Request] DRAWPOLYLINE doesn't have an Offset parameter
Tokens for both Virtual Routes & machining tokens both have an Offset parameter, but for some reason the 2D token for DRAWPOLYLINE doesn't. Could this get added in? It'd make drawing complex shapes on cross-sections easier, especially in cases you've
Windows & Doors not showing in 2D/3D OEM
Newbie here, so I apologize if this has been asked & answered. I searched the knowledge base, but searching for "window" brings up more about command windows. Currently running build 24.1.1010.641. When I add doors/windows in the walls (Window Options/Door
Miter face frames to case parts
I can't seem to find where i set the face frame parts to miter to the cabinet parts. Can anyone help me with this?
How to Add a Steel Frame Glass Door Profile to a Product ?
I'm trying to add a steel frame glass door profile to the products. I’ve located the section under Specification Group > Door Options, as shown in the attached screenshot, and I see a dropdown for Aluminium Door Profile with options like “Häfele Profile
Exporting Projects
When I am exporting projects they are formatting as SDF files, is this correct? I'm sure at my previous job they were a different file type but can't remember the name, can anyone advise please.
"Products in New Drawing Setup"
Curious to know if this function is being used by anyone, and its intended use. Is this a function geared toward the use of Innergy, within BSB? Trying to understand the principle:
Can Bricscad do this?
we are still waiting to do the switch to bricscad, but Ive been wondering if it could be used for MV to revamp the way MV does annotation. i've been tasked with having MV handle more of our annotation automatically and i must say its kind of ridiculous
Always Make Specific Part get Cut by the CNC
Is it possible to always have a specific part of a product cut by the CNC? We have a beam saw and CNC and sometimes the engineers forget to have the CNC cut the more complicated parts.
Feature Request - Exe trigger upon processing
Another pretty niche one but one that I think come in handy for the advanced users. There is another software we use that gives us an option to run an executable file upon the generation of a program. This has the potential to come in very handy for after
Die wall stud dado
Currently when machining die wall dados, they are too tight. I am trying to find where I need to change clearances. Even if and when the material thickness is changed, we still have to manually change machining. I am afraid that I will change something
Bay Qty
What are other options for cabinet that has more than 10 bays?
Blum Metabox Drawer
We are testing the Blum Metabox for a client specification, we've not used them before. On our test cabinet, we've had issues so I want to ask some questions. Our first problem were the holes for the expando inserts, they came out at 16.6 mm instead of
How do product subfolder respond to library updates
We're working our way to moving into the foundation library and we're trying to separate the original library products from any ones we would modify to our own needs. I know there are many ways to do this, but the way we're looking at is to create 2 folders
Upcoming Software Update and Impact on Spreadsheet Formulas
Given the impact of this spreadsheet parser change, the documentation required to identify and correct invalid formulas should be posted directly with this announcement. I requested the FIND and REPLACE documentation from Support yesterday and have not
Nest Settings - Border Method Standard Setmill Location Options
We machine a lot of MDF doors for powder coating. For our door panels, we would like to have the border rout Setmill Location on the top or bottom of the door edge, which in most cases is the narrow edge. The Setmill Location options do not offer a "Shortest
Extra pages on reports Totally random
Every once in a while I get extra pages on reports see attached. is there a fix for this?
Need Help With Profile Doors
I am trying to achieve this door profile pictured below. Very basic, basically shaker with radius instead of corners. I want to do these in a 1pc MDF or possibly 2pc. I have NEVER done this before, so I started trying to play around with settings to do
BSB slow
Does anybody else have BricsCAD being really slow? Mine is hanging like almost everything I do it just hangs and stops responding. These files really aren't that big and its a brand new computer so I'm trying to figure out if its something on my end or
Wrapped Batten
We have Wrapped Batten checked and a width entered, yet it is not appearing on any cabinets. We are hoping to use it as an "inset top facia" for base cabinets with larger top reveals; we do not want to cut into the top or side panels. Is this the best
3D Hardware DWG does match the drawing in the Graphics folder
I created new hinges by copying existing ones and changing the information on them. I created new drawings for them in the graphics folder. All the naming principles match. However, the drawing for the product doesn't show the new hardware drawing. For
Grain Matching in BSB not working properly
Parts that should be grain matching vertically in a single cabinet are not. Material is set as grained. Perfect Grain is on. Split doors from drawer fronts is set to 0 as well as split double width cabinet. Allow Grain Matching across multiple cabinets
tall door, center hinge location when fixed shelf is also centered
Software build: 25.2.227.641 Library build: 26.0112 When I enter a 90" tall cabinet, and it gives me five hinges, and I select a fixed shelf, the middle hinge is centered on the door, intersecting the location of the fixed shelf. There are conditional
Router wrong side of line
What can cause this to happen? Ive used this piece of hardware for quite some time, and havent touched the token, ,,,,, When i draw the part in 2D, It shows Tool on the correct (Right) side of the polyline For an internal Socket rout, but when i nest
The ability to add multiple tokens from clipboard
To have the ability to add multiple tokens at once, highlight all 4 for example from a group and add them in one hit would be a nice feature. time and time again i find myself adding one by one to see which one does what i need it to do, when in my setup
Next Page