Adding New Leg Leveler Base
I am having trouble adding a new leg level base. It's the Richelieu 230E1590. I copied one of the existing leg system's 3D_File and just replaced the block with the new Richelieu DWG by copying and pasting into the new file. I moved and rotated the partMissed Font(s) BRICSCAD
Anyone seeing this popup? I have googled it and just find links to disable it and not a reason for it popping upViewbase Function. Opening OEM drawings in BSB
Hello, Does anyone here use the Viewbase function for their drawings? My team relies heavily on it because it automatically updates drawings when we redraw or edit a product, generating plan, front, side, and isometric views that suit our design needs.Issue with drawings.
OK. I have been using an OLD.. MV library and we have updated to the new MV Foundation Library a few months ago. Actually we have 2 libraries. Up until now i have been working on a long project we started before the update so i am using the old version.Negative Value in Material Name
Hi everyone, I’ve encountered an issue when applying a negative material value in a formula for a cabinet part. Specifically, when the formula includes a negative in the Materials (e.g., ="-" & Material Name), the associated part completely disappearsVertical and Horizontal Panels
Is there any way to have both vertical and horizontal profile panels on one door/panel? See attached photosHoles drilling on 2 parts because of checkout?
My Ribs have a checkout that has rails sitting inside them, when I toggle on my back/front rails, the drillings from my ribs go into my rails but also into my colour facia panels. How do I have it only to go into my rails?AcBrandRes.dll error - FATAL ERROR: Unhandled access Violation Reading 0x0000 Exception at BACEE681h
Long-time lurker, first-time poster I’ve run into an issue with my secondary MV licence. It’s throwing an AcBrandRes.dll error. I’ve tried resetting profiles, clearing the registry and a bunch of other fixes, but no luck. From what I’ve read, it’s anShadow Line Finger Pull machining location? Machine tokens not showing up in Part Properties Help
Hi, I am trying to work out how the shadow line finger pull machining gets added to the left and right gables, I know when you go into the shadow line subassembly you can turn off the left or right machining but I cant find anywhere where the machiningHide and Seek
I'm Having a problem with my automated dimensions attached to my section drawings, they don't appear right away but only appear after I leave e the program and reopen but as soon as I re-enter a unit to make changes they hide againNew Toolbox Release Available Today: Build 25.1.0729.641
We are happy to announce that Toolbox build 25.1.0729.641 is now available! This build includes resolutions for issues with creating custom hatch patterns, visual styles during redrawing, new configuration creation, and more. Please refer to the completeRead Only
Can the developers add Open Room Read Only to the Microvellum Project tab and free the drawing up for other engineers to open and edit? I am constantly asked to close a drawing for one of the guys to edit. Once they open it, I can open in Read only. IfHow to remove this entities pop up box in Bricscad
This is driving me nuts. It gets in the way of MV windows or when I am trying to select grips. I have searched everything I can to hide this but can't find the right check box.EQV Function. HELP
I am trying to build a custom door style with multiple vertical slats spaced evenly. I found the EQV function is *almost exactly what I need. I have one row in my CutParts with the slats and I'm using the EQV formula to space them evenly. The problemMicrovellum Deauthorized Me as the Admin on MY ACCOUNT
I have had two seats on my PepperCADD account for literally decades. As of July Microvellum has set Chris Abubo, eng. mgr. at Spooner Woodworks as my Administrator. I haven't been working at Spooners for three years. Clay, Lenny, Chris E, they all knowInvisible Fastener Profiles no longer showing in the drawing
Hi there, Since switching to BricsCAD, i have noticed that the routes for the invisible fasteners (IF Peanuts in this case) have stopped showing on the cabinets. Without drawing the parts in 2D, or processing to the nest to view the sheets, means we aremessage
hello, does anybody know why I got this message and what it means? Thank you.IF Command
Hey guys, I'm trying to make a custom product using a checkbox promt adding a center rail that has a PLINE cutout. What the product should do is, when the middle rib is checked, it adds the below PLINES, when unchecked it doesnt. I've tried a few thingsSketchup to Microvellum
Hi, Is it possible to bring objects from SketchUp into Microvellum? I tried importing a DWG file from Sketchup, but Microvellum seems to recognize it as just a drawing or image, not as an actual object. Is there a way to bring a cabinet or 3D model createdToolbox BSB Viewbase
Trying to understand a few things that are different to EOM if anyone has the answer or has tried it. Using the "baseviews" appears to be paperspace only, so the only way I know how to add things with viewbase is by going into the model space, using theDraw Product Prompts doesn't match result
When machining DTC Smooth draws the product prompts 13mm and the CNC drills 13mm for 5mm diameter holes but when using a Blum Merivobox draw the prompts are still 13mm but it machines 5mm fittings at 16mm deep, I've looked in Design Data and Global FileError using drawblock token on section
i get this error. library version 24.0520. OEM 2025 build 25.1.616.641 Any help would be appreciatedAdj shelf line boring missing at division
Trying to build a tall cabinet with a division and adjustable shelves on the right side. I added adjustable shelf subassembly to the opening using pick corners and the shelves go in as expected, only there is line boring on the right side of the shelfWHAT No Gizmo in BricsCAD
Not to happy about the commands not being available for either rotation or move of solids.Microvellum Engineer Wanted
Jonathan Arnold is looking for the right candidate to work with our team of professionals in producing high end custom kitchens. Would prefer minimum of 2 years' experience as Cabinetmaker and knowledge of cabinet construction, concealed hinges and drawerToolbox Panel will not load a start of Bricscad
Loaded Bricscad and checked out a few things and the next day when opening it the Toolbox Panel doesn't load. Anyone know the command to get it started up?Multi-pass Tool Not using small parts handling
I just set up my first multi-pass tool with incremental steps. Now my double pass onion skin set up is completely ignored. It works fine if I use the same tool but in as the one pass version. Any ideas?Edit Part - Select Polyline
Applying geometry to a part profile using Edit part, Select Polyline was a huge time saver in Toolbox OEM but BSB doesn't allow this to be done. Instead you need to draw the part in 2D, paste the geometry into the part, select tooling, set depth and toolGrain Matching SMA
Was hoping someone could point us in the right direction. When doing wall paneling we typically do a quick SMA on the panels. We've got these setup with the Perfect Grain Identifier but for some reason it spins the layout of the panels. What is it thatPart Properties
Since this mornings outage, is anyone else having issues with Part Properties. When opening parts in Part Properties, I adjust what i need to adjust, then hit Save & Redraw & nothing actually happens, so i save & close, then I open the product promptsBricsCAD Right Click Menu, Dynamic Input
Hi Community, Is anyone with experiencing issues with the Right Click so far. I have installed today the BSB, and I researched a few options and settings, it looks like there is no way that we can get the same Right Click Menu and time sensitives as AutoCAD?Do these errors still happen on BSB? Have not switched yet
I am logged into a VPN and was working on my personal computer for a few seconds and I heard the error sound. Toolbox OEM threw me a random error. I'm still not sure what the problem is but I was connected to the VPN and remote screen the whole time.Toolbox OEM 2025 Icon vs Toolbox BSB Icon
I would like to see a more definitive difference between the application icon of Toolbox OEM 2025 and Toolbox BSB. I have both running on my workstation. I have the shortcuts pinned to my taskbar. Currently the only difference between the 2 programs isHow to move from OEM to AC
Not really seeing the benefit for us to move to BSB. We have full AutoCAD licenses that we are using for Non- Microvellum projects (because we use OEM for those). How do I take an off the shelf full version of AutoCAD and install Microvellum?Mortise & Tenon Settings and MiterFold
I revisited my original post and decided to break up my discussion and focus on the Mortise and Tenon. The multicolor item is what I drew in AutoCAD Solids and the "product is the single color. As you see the legs show the Mortise and the Facia showsToolbox BSB - Measurement Units
We drawing in fractional Imperial units. But in the Properties pallet, I like to see the measurement in decimals to check if the dimension is a perfect fraction or not (see below - highlighted yellow). I checked and the displayed measurement is roundedMaterial Hatching
I would like to know where to go to edit these hatch settings.Ortho on - mouse movement sideways at line using linear dimension.
Re: Bricscad - Does anyone know how to change / get rid of this when ortho is on? When you get to the 02nd line it allows movememnt from side to side..."Countertop Straight" material selection for backsplash?
So I turned on the material options tab in the standard MV product for 'Countertop Straight" in the 24.0520 foundation library. It only gives me the countertop material and no option for the backsplash material. One would think it would make sense toBSB or OEM select similar line thicknesses
is there a way to select similar line thicknesses when i import a pdf floor plan? They are on the same layer so when i do select similar it selects everything. And no we don't have autocad architecturals unfortunatelyNext Page
MVU eLearning
Grow Your Knowledge
Follow along with RJ as he takes you on a journey to build your foundational knowledge of Toolbox.
Announcements
New Microvellum Release Available Today: Build 26.1.0422.641
We are happy to announce that Microvellum build 26.1.0422.641 is now available! This build includes resolutions for issues with product dimensioning, associative machining, grid view within the processing center, sawing reports, and more. A new optimizationNew Microvellum Release Available Today: Build 26.1.0529.641
We are happy to announce that Microvellum build 26.1.0529.641 is now available! This build includes resolutions for issues with docking sizes, the formula editor, sawing G-code, and more. Please refer to the complete Release Notes for more informationNew Foundation Library Release Available Now: Build 26.0527
We are happy to announce that a new update for the Foundation Library, build 26.0527 is now available! New releases of Microvellum's Foundation Library include resolutions for numerous issues, numerous enhancements to existing products and variables,New Microvellum Release Available Now: Build 26.1.0520.641
We are happy to announce that Microvellum build 26.1.0520.641 is now available! This build includes resolutions for issues with room names, the find and replace feature within Workbook Designer, item number scaling, and more. A new option has been addedWe've Upgraded Your Microvellum Experience
We’re making it easier for you to get more out of Microvellum! As Microvellum continues to evolve, we’re taking a deliberate step to simplify how the platform is delivered while providing more value to our users. The result is a more streamlined approach
Follow us on: