BSB Trial Time
Curios if anyone hasn't switched over to BSB yet and has the same pending conversion expiration date as we do? We have been too busy to slow down production and switch over to BSB as we are all accustom to OEM. Looking back through it looked like we had
MICROVELLUM ENGINEER WANTED
MicroVellum Engineer Wanted: Kay Dee Company – Omaha, NE Full-Time | On-site About Kay Dee Company Kay Dee Company (www.kaydeeco.com) is a respected Omaha-based manufacturer known for delivering high-quality custom millwork, casework, and architectural
Question: Solid Model Analyzing Non Planar Surfaces
What is everyone's preferred method to model and get non planar surfaces to SMA so that you can cut the product on the CNC. I currently have a desk job that has some curves around curves that are Solid Surface. I want to be able to output the parts to
1 screw in stretchers
currently we have 2 screws in our stretchers and would like to set up as just 1 in the middle. What globals do I change for this?
Overdrive Pro won't open
Overdrive Pro won't open in some projects but will open in others. Won't open with either using the shortcut icon or typing in the command bar.
Feature Request: Room Prompts
It would be great to have the ability to set up Prompts that are like the Global prompts but for the room specifically. The spec groups do most of the heavy lifting and paint with a broad stroke which is nice it almost every use case. Some times your
How to tell cnc which pass to do first?
Hello, I have a door with a slot in it, there isn't much meat left on top of the cut and the machine is chipping the edge because it does the slot first. I would like to tell the machine to cut the slot at the end, how can i do this?
The product comment can only contain 255 characters
Hello, it would be great if we could use the product comment field without restriction. This comment field is used in our factory to validate the cabinet before the delivery. If the text is too long, there's no warning, and the text is truncated in the
Error when creating section views
Hey All, I get this error when trying to create a section view of a cabinet Instead of creating a typical section view, these elements are created (in the volume of the cabinet). These are the section drawings tokens. My guess is that they are not being
adding a .cutx file to subassembly
trying to add a customized subassembly to foundation library
BSB Publish/Plot Job
Is there a certain way to publish a job through BSB? Normally in OEM, we just selected all of the paper space tabs and just publish the job. BSB I can't do that. Also, anyone else having weird issues with the "Publish" Button? If I left click it, it just
Move Dowel holes to centerline of part
I want to move the dowel holes on our drawers to the centerline of the part. We use 5/8" for our drawer sides. The hole placement is 0.375", I'm assuming its getting that from 0.75"/2 I have looked in global settings and also the machine token, but I
FEATURE REQUEST: Ability to Mass Edit a Comment Field in Overdrive Without Overwriting All 3 Comment Fields
I would like the ability to Mass Edit one Comment Field without overwriting the other two Comment Fields in Overdrive. Currently, when you Mass Edit the Comment Fields, you overwrite all three Comment Fields. If you don't understand that this will happen,
Provide an easier solution for external IT teams to implement a server setup with minimal errors
I think this should be priority #1 on the development list. And also revamp the data access tab in options.
MV Freezes As Soon as I Click "Walls"
Things have been running fairly smoothly since we got Microvellum in October. Suddenly today I started a new project and new room. I draw a polyline 96" long and then went to turn that into a wall. I got a spinny wheel for a second and then NOTHING would
Processing Station not reporting batch name on Folder creation
So we have 2 routers here and when i create a batch for the Biesse, it'll report out and add _BIESSE to the folder name (Biesse is the batch name). When we run a program through our Homag it doesnt add _Weeke at the end of the batch report. I can't figure
Custom Door Style
I’m hoping someone can give me some advice on setting up a custom door style. I have some experience tweaking the parameters in the door workbook to get what I’ve needed in the past, but I’m struggling at the moment. I have a project coming up that calls
Hardware Configuration / Visibility Problems
Any advice on hardware visibility in Microvellum? I’ve noticed that some hardware components (such as hinges and handles) are not displaying in my design, even though the part configuration seems correct and the hardware is assigned. Has anyone had a
FEATURE REQUEST: Ability to Read/Write Formulas in C#
I would like an interface that would allow me to convert the existing Microvellum Excel Formula into a C# Formula for editing and convert a C# Formula into an Excel formula for use in Microvellum using AI. I would like to be able to open an AI window
Drawing Walls in Microvellum using BricsCAD
When you draw a polyline and right click on walls and choose "Select polyline path for wall" and MV draws the wall and applies the dimension over the wall, the dimension endpoints are connected to the wall and cannot be moved like it could when I was
Products fly across model space when i redraw
Hello, im pretty new to microvellum. I'm using redraw on products and they fly accross the screen, i think they go to their original insertion point. How can i modify a cabinet or panel and have it stay where it is. Thank you
need help with 2d instructions
so i spent some time getting our 2d instructions set up, we just did an update and lost those changes i made. now i'm trying to save our own 2d instructions as a new subassembly and change G!Drawing_2d_instruction to the name of my new subassembly. it
Ctop elevation/section
We are on the 25.0319 library, our countertop product was hard for me to figure out. I was able to get the elevation to show correctly with the correct 3/4" material by adjusting the thicknesses_countertop in the subassembly after some trial and error,
Pick points added to section drawing
it would be handy to have a pick points option for drawing a section. i would use the the draw section views of the whole wall more if i didn't have to figure out where on the wall each section cut needs to be
SQL CE Viewer
What's the procedure to save changes? I had a few products unlinked.
Sales contact
Hi Clay S, We have not received any reply from sales team even we received this email Hello HOANG, Our account representative covering your area will be following up shortly. If you have additional questions or comments that you would like to pass along
A Couple Issues With MV: Face Frame VS Standard Biased (are we equal or not)
TOP TIP copy and paste this into ChatGPT and it will summarise it much better than i ever could and save you reading it all if thats your jam. Who else in the face frame market feels that we are unfairly left behind when it comes to features and fixes?
Saved updated Sub-assembly to template.....How do I apply these changes to an existing project
I have been making updates to some of the sub-assemblies and products in our library. For example: I added a 3rd drawer spacer to the "wood drawer box" sub-assembly. I saved this sub-assembly change to the template When I create a new project all of my
FEATURE REQUEST - SMA to have Product Name Prompt
It would great if after running SMA on a product there was a prompt already setup to name that product. This would save time of adding your own or opening up Overdrive Pro renaming the new product then exiting.
FEATURE REQUEST - Clean Out Corners of Notch
It would be great if the machine tokens "3 Sided Notch" and "Square Corner Notch" had options to clean out the corners. This can be done with a Polyline but these machine tokens are far quicker to add than setting up a parametric polyline.
Error Handling / Project Part Issues
Has anyone experienced this error in Microvellum? I’m working on a project, and when I try to select or interact with a part, I get this message. Even though the part should be part of the project, I keep receiving this error. Does anyone know what could
FEATURE REQUEST: User Defined Separators for Formula Driven Materials
This was discussed in the Focus Group about the Formula Driven Materials, but I wanted to formalize this request for having user defined separators for the Formula Driven Materials. Currently, the Formula Driven Materials use an underscore "_" to separate
2D Drawing Options "TAB"
I would like to know the steps for adding the 2D Drawing Options to "USER PREFERENCES"
Microvellum peAk Recordings Missing Chat/Q&A
In watching a couple of Microvellum recordings in peAk for the Release Reviews and Focus Groups, I noticed that the Chat/Q&A was not recorded along with the main screen. The Presenters were answering questions that were showing up in Chat/Q&A, but I couldn't
Solid Modeling "Custom Tools"
I searched the "KB" and found no article associated to the use of the "Custom Tools" Tab. Wonder if anyone has some insight to share?
Current Microvellum Layers
Is there a KB Article or Library Release update explaining the purpose of the added layers
Is there a way to Copy wireframe lines off of the model and paste them as CAD?
I've been struggling with what "Draw 2D Plan and Elevation and Section" select to draw. I know these defaults can be tweaked but right now our team is only letting our drafting team head mess with those. And actually the tweaks I would want to make may
Is there a systematic way to straighten out/clean up a file?
This is how I want it to look. This is what my 2D Plan drawing is making. (This go around. It was different last week) New user here. I've been working on a wall with a base cabinet and shelving and fillers and panels and some non-standard things like
Microvellum has big lags and I also can't nest
My microvellum is extremely slow, every pan has a delay, every zoom has a delay. I can't work like this. I also can't nest my jobs, all my reports are missing dimensions.
Beaded Face Frame
Hello, When I have a beaded face frame project, I need to move back 1/8" the hardware of doors and drawers (hinges and slides) so the face of the door/drawer front sits 1/8" back from the face of the face frame. The way I'm doing it now, I cheat the material
Next Page