BSB Rendering Problem
Hi everyone I found a problem in my Toolbox BSB that I can not figure it out. when there are several machinery on a part the system can not render it properly. So in my project I had to switch to OEM to create my part in Draw Part In 2D and see the result
Dowels on labels
Is there a way to modify the way dowels show on the labels? Sometimes our panels are so big that the dowels can be easily mistaken for holes. My initial thoughts are to extend the line that represents a dowel beyond the outside of the panel instead of
DRAWING ONLY OPENS "READ ONLY"
I was working on a room when toolbox closed unexpectedly. When I tried to reopen it, it would only let me open as read only. How do I open it so I can finish editing it? I have tried to restart toolbox but that didn't help. And no one else has the drawing
Formula Driven Spec Group
Hey all, I have been using formula driven materials since about 2017, and over the years have developed a method and philosophy so to speak on how to implement them into spec groups that simplify the workflow of spec groups setup, lower the barrier of
Invalid object name 'tMaterialsOP'. ERROR
Hi Everyone This is the first time I got this error without do any changes in Microvellum Does anyone have this kind of error before ? I need to find a solution, Microvellum support is not answering at all for few days already
Make Numbering Sequential on Reports
is there any way to make the reports print and get made in the correct number order? right now it does this odd system of doing all numbers with 1 first, then 2, then if nothing else going in order like 1234, but i want it from the start to go 1234 as
New Toolbox Release Available Today: Build 25.1.1204.641
We are happy to announce that Toolbox build 25.1.1204.641 is now available! This build includes several new features added to enhance the usability of the Toolbox login and About Microvellum interface. Additionally, the "Rotate Parts In Nest" feature
Face Framed Cabinets
Hello, I have a question about face framed cabinets. When "Door-Drawer" and "Drawer Bank" are not using frame mid rail but we keep the stretcher. Is there an option to move the stretcher 1/8" back from the back of the door/drawer front and have stop dado?
Build a Box Video
I was watching a video by RJ and he mentioned viewing a video called "Build A Box". Does anyone know where it is located. I cant find it?
Workbook designer "L"
hello, I'm trying to add another option to the "Left End Condition" and "Right End Condition" on the Workbook Designer Local (L), on the "Prompts" tab but it does not keep it. I make the changes, save it, and go to the cabinet prompts and the changes
Master Cabinets not showing carcass in 2D elevation
New user here. My standard library cabinets show up in 2D elevations but not the master cabinets for some reason? Any insight?
Missing Rail on Drawing Tokens
Hi in one drawing im working on, all of the base cabinets are missing the top frame rails, how can i add them back in, i cannot see anything obvious or missing or broken in the design data, if i'm looking in the right places. Update* ive tried new builds
Has anyone created a bench product with a lift up top?
I am curious the best way to approach this. I started with a box end product with a Face Frame on the front, and I plan on using a ladder kick for install. How would/should I add the lift up top with hardware? Using a finished faces subassembly with the
Rollover measurements in decimals while keeping model space units in fractions in BricsCAD
How do I show rollover measurements in decimals while keeping model space units in fractions in BricsCAD? I want my dimensions to show as rounded fractions but when selected and my rollover pops up i want it to show my measurement as a decimal like toolbox
FEATURE REQUEST: Adding basic metafiles to all foundation library products
The solid model analyser adds some basic metafile data to each item solid modelled, This allows product detail reports to show a picture of the item nested, Good for joiners to help see what they are making, Already in most products, needs adding to the
Applying Solution to Multiple Products
Newbie here For integrated finished ends, our shop adds a small dado to retain the back of the cabinet. I wanted to created a parametric solution I created a feature check box in Project Wizard I created conditions in the product design data to update
Is my project toast?
I just got this error message when trying to draw walls: Please tell me there is a way to fix this without starting over. I've been working on this for 3 weeks. I found a Microvellum video on YouTube but RJ goes deep into detail about a very specific
Tenons
Hi, i am trying to find a way to make a tenon go through two .75 pannels. Does anyone have an idea of how i could proceed? I have been playing around with the dado machining option but nothing works the way i want. Thank you!
Machining tokens
Hi, I have been trying to add construction holes using machining tokens in part properties. I can't figure out how to make the holes apply to both parts. I've tried to do exactly as in practice videos but it doesn't seem to be working, the holes keep
Now Hiring - Microvellum Drafting and Design
About us: Fixtur-World, Inc. has been a privately owned company since 1979 in Putnam County, TN near the city of Cookeville on the Highland Rim of the Cumberland Plateau. We have provided millwork, cabinetry, furnishings and fixtures to almost every industry
How to Connect (Or Reconnect) Walls
I'm trying to draw my Plan View by Drawing 2D Walls and getting this error "Please select walls that are all connected." I have zoomed in as far as possible and dragged the corner snap points together, but after this I don't know what to do. Also - not
Not displaying true route on part after we 2D the part
I noticed after I 2D a part and add certain custom routes (Vcut) When I update the part It isn't showing the true route however when I nest the part I can see the route and everything cuts as it should. I have also noticed this sometimes when using the
Calculator
Hi everyone, I am trying to add a calculator to the "countertop with substrate" product from the library (to split the countertop into sections), through edit design data. I believe everything added correctly (i used "Overview of Custom Calculators" article
Sticker report
We haven't been able to change the orientation of the edge banding, for some reason it orients on the wrong side and we can't figure it out, do you have any suggestions to change that? Attached are picture of the sticker and the cabinet. Thanks in advance
MV Command Compendium
Is there a more complete list of MV commands than what is shown in the KB Article? It would also be super nice (from a nerdy perspective) to know when the commands were added to toolbox (version? date?) you may ask.. "but Ezra, why would you be asking
added drawer slides (KV8450FM, etc)
A good while back I added a bunch of KV drawer slides to the hardware look-up tables. I added KV8400's, KV8450FM's and KV8650FM's. These work great in products, but they exist only in the look-up tables, not in the hardware parts of the material files.
Best Way to Draw a Plan View of ALL Walls and Products?
When you try to choose more than one wall to Draw 2D Walls Plan View you get the "Please select walls that are all connected." dialogue. Why is this limited like that? And can I get around it without making a separate drawing of each wall and then meticulously
Machining on extruded entites
Hi, our team is new to MV. We have been trying to test the solid modeling tools. We noticed it is possible to add machining to vertical entities and those will apply to adjacent extruded entities. Our problem is that we need to add machining in between
True Shape Nesting Optimizer (Beta) Now Available
With the 25.1.1013.641 update, you can now try out the new True Shape Nesting Optimizer Beta! If you already have the True Shape Nesting module enabled within your license, here’s how to turn it on: Go to your Processing Station settings and set the Optimizer
FEATURE REQUEST: Updated Product Prompts UI
This may be wishful thinking, but I think an update to the Product Prompts, similar to the image below would be extremely helpful. I would also like to see the added functionality of being able to access the drawing while the prompts window is open. Pretty
RIBS/DOG BONES SMA - OVERLAPPING MACHINE OP - SOLVED
Team I am having this issue with the SMA. It is generating a double line: one with multiple sections and another with fewer sections (as expected). Has anyone had this issue before?
Please help
OEM Build 25.1.129.641 Foundation Library 25.0319 Is it possible I get this because it didn't install correctly? I had a ton of file names that were too long so I just skipped thru them during the install process. I can change layers just not in the
Contacting microvellum?
I wanted to talk to someone about buying microvellum for our shop. I used the contact form about a month ago, and i tried calling daily for a weeks time. I still havent heard a single word from them. Any ideas where i can actually reach someone?
Extend Finished Toe Kicks for Miter
I would like to have all finished toe kicks extended by a set amount to make it easier to miter the corners. I've looked in the globals and don't see a way to do it unless I'm missing it. Is this something that would have to be added to the length formula
Horizontal Drilling Depth Issue
Newbie here The dowel holes in MV are set to 28mm depth When I open the MPR file in woodWOP, the holes come in at 20mm depth. The holes stay at 20mm no matter what I change on the MV side. The MPR file (notepad) shows a value of 28 for the depth [H VERSION="4.0
Construction Method Missing
Quite common on divisions is the construction method not following through, as you can see it is set to dado & Screw, but is not dado'ing like expected. Thanks
Lost my ARCHITXT.SHX font and dfd-bold.shx
Hello, I've been using microvellum for only 2 weeks so I need your help lol. I work in Quebec so i have to use accents on some letters and i normally get them by using combinations of keys but it wasn't working even though my keyboard was set to french
Understanding hardware items in reports
Foundation: 25.1024 Build: 25.1.129.641 I need some help understand the relationship between hardware items and how/when they are included in reports. Scenario: 1) We added a bunch of faucets to our custom sink subassembly. 2) The faucet types are filtered
Toolbox BSB - Final Conversion
Can someone please confirm what happens when I click "Final Conversion" for Toolbox BSB FLA Subscription? Does my Toolbox OEM FLA Subscription stop? Or will Toolbox OEM FLA Subscription continue as long as we keep our Toolbox BSB FLA Subscriptions? I
Horizontal and Vertical Openings
Hi Everyone. Please Can anyone help me. Opening Insert Subassemblies whether Master Cabinet designers or Cabinets Starters from library 24.01 or even 25 don t have the Bay Options they Just have Component inserts options and those options are not enough.
Next Page