Toe Kick inset on Face Frame Cabinets
We don't do a lot of face frame cabinets so I am still trying to get familiar with the framed library. I just got caught in a mistake that made it out to the shop. The toe notch did not calculate for the hardwood face frame. The global setting has aCopy a Specification Group when importing from xml
I have one Specification group in my template. When I import an XML project with multiple group of colors can we take the default specification group and copy it for every group of color I need? Thank youFEATURE REQUEST: Updated Edit Material UI
The images below illustrate some enhancements I think could provide some clarity and eliminate any confusion, as well as help streamline the button order for editing materials. Simply removing "size" from the buttons for the sheet properties helps reduceSpec Group Prompt when new room created
It would be great if MV prompted you / asked you which spec group you would like to use for each new room you started. I'm always going into Overdrive Pro (Product list) to change the products into the correct spec group once I realise that the incorrectPocket Penetrating Cutouts Setting
Does anyone how the Pocket Penetrating Cutouts Setting should be set? I have mine set at 12. This might be a change in the 21.1.420.641 build as I know I had a in depth service request to make this function how i wanted it. Now my round cutouts up toMV Export WO programming logic
I hope this doesn't come across as negative, but I just spent 3 hours clicking the yes button that I'm not getting back. When you want to export and delete the workorders, it makes you check each on individually. I can live with that. But, if you checkExport Material Pointers
In the latest 21.1.0420.641 build, adding a new way to import materials into an existing library is a long waited feature that finally became a reality. Thank you Microvellum. Another feature that would be great to see would be a way to import materialFEATURE REQUEST: Add W x H x D at Top of Edit Design Data
There are times when you're deep in a product and you're trying to verify calculations based on the product's width, height, or depth values. Having those values displayed at the top of Edit Design Data would be very helpful and eliminate having to navigateUpdating Material Workbook(s) takes ages...
Does anyone else have an issue with the "Updating Material Workbook(s)" notification taking ages to go away when opening a job? We never had an issue before, maybe it has something to do with a new update or maybe my material db is funky? It will goTransfering wizard values from an .XML file
Anybody know if there is a way to transfer values from a .XML file into the Wizard's workbook? so far we are able to do it in the local workbook to affect cabinet prompts but cannot seem to do it in the Wizard or any other workbook. I tried prefacing my prompt name with W! but it did not work.Locating hardware on subassembly inserts
We have been generating CNC machining for locks and strikes using Microvellum for over a year now without any issue. For library cabinets the way we have it setup does not require the user to do anything except check the box in the prompts to lock theBetter Fuzzy Logic In Material Search
It would be great if when I am searching for a material in the material browser if I could just type a few defining features and just a much more narrowed result list. As you can see in the image below, when i search for "white", I get all the materialDoes anyone know the formula to Route a Circle-Pocketing?
Does anyone know the formula to Route a Circle-Pocketing?Overlapping Prompts
I think this is controlled in the spread sheet, but I can't figure out why or how these would be overlapping. I don't have access to my Door Swing Prompts for my Upper Products. My other single door products are ok.FEATURE REQUEST - Want to reference Project Properties and/or Room Properties info inside a product
As an example, I would like to use the Room# in a formula for a prompt in my product. We enter the Room# in the Room Properties, but how can I reference it inside the product?Associative Hardware
We started using these brackets for our removable plumbing panels and would like to add this to our Hardware Library and add it to the Plumbing Panel Subassembly. Does the hardware need to be drawn in 3D? When the panel is not being used I don't wantMV Block, broken since flash is not supported any more
Since adobe stop supporting flash, i was curious if there another tool to better visualize the panel rotation to machine points. I don't have any screen shots of the MVBlock. User would choose what machine point and rotation,the panel would be displayedPart Orientation in grain container
Hey everyone, I'm trying to grain match a closure panel (false door on bulkhead) to the upper cabinet below. I'm getting the closure panel rotated in my grain container like in the picture below. Regardless if I have none, or force width or length inProduct shows up in Product List but not in Drawing
I tried to change the width of multiple cabinets in Product List and when I tried to open one of the cabinets in the drawing, I received a fatal error and MV shut down. After going through the recovery process , I tried to open a Product and MV crashesHow can i have drawer front adjusters reference drawer box, not drawer front.
I need the position of the drawer front adjusters to be a fixed location in the drawer box and variable on the drawer front. We buyout all our drawers and i can give the vendor a location for a drilled hole for the drawer front adjusters, but it willPart Properties
We upgraded to Toolbox 2021 not long ago & we've noticed when using Part Properties now the option to "Save & Redraw" doesn't work properly anymore. It used to redraw your product & keep Part Properties open. Now it closes down Part Properties & redrawsDrawer Pulls not placing correctly
I don't know what I've done but now my Drawer pulls are not showing up correctly. Can someone point me in the right direction to fix this. ThanksFEATURE REQUEST - Option to Allocate ROLLS of Material (for fabric, vinyl, carpet, rubber, etc)
It would be GREAT if there was a way to allocate material out of a ROLL, rather than only having the option to allocate out of sheets. The material would still have an overall width and length (of the roll), grain direction, etc. But, when optimized,Add material name to G Code header
Hi. In our old system the G Code included the material name in one of the first lines, I was hoping to do that in Microvellum G Code. I have been in the custom headers configuration in the tool file in the integrated post processor settings under customFunctions I Didn't Know Existed - PARSETEXT and VHLOOKUP
This is really just a heads up for anyone that, like me, had never browsed through all of the Functions in the function list in Workbook Designer. I just found out that these 2 functions exist, and they will really help with a lot of the complex formulating5 piece drawer box lock dado
Is there a construction method for making 5 piece drawer boxes with the bottom having lock dadoes on all edges? I can seem to get the sides to dado to the sub front and back but the bottom still is placed in a dado. The shop would prefer the bottom toHas anyone considered or already formulated the interior finish of cabinets based on them being “open”?
When dropping new cabinets, the interior finish radio button is hard coded based on if the cabinet is an open finished cabinet or not. This work great when you are dropping selected cabinets from the library as needed. But if you use the “Swap Cabinet”How do you make a route priority last?
I want to have some cutouts on a part to be done last, Reason for this is part might move if cutout is done prior to other machining. In previous releases you were able to designate the priority number 999 so that was done last. 2020 version you startUnderstanding Machine Points
Hello, I have a custom countertop product that someone designed for us and it works well but now I am trying to add banding to the edges of the splashes to identify them correctly. The problem is that when I assign the banding to the part as it appearsSolid Model Analyzer
I have product that is essentially a rectangular part.. My process was 3d extruded solid from ACAD... solid model analyzer... the microvellum product that is created - the part width is actuallly wider than the product width. when nested the part is rotatedMultiple Project Wizard Components
I have several Project Wizard Components for different construction builds. I would like to add more prompts to all my Project Wizard Components. I have added prompts to one Project Wizard using Wookbook Designer. Is there an easy way to copy these newPROBLEM FOR NESTING AND ERROR ON SOLID MODELING
Hi, I have updated new library and new 2020 Version of Toolbox, I have 2 problem with this new version which I can not work with the software, 1. When I finish my drawing and will nest and create G-Code from my project I can not see any part on processingStandard Machine Token Parameters
Does anyone know where Standard Machine Tokens get their default parameter values from? For example, when I add a machine token, 3 Sided Notch, the Tool Number is always 102. I would like to change that value to reference a Global variable so I don'tPart Properties - Save and Redraw
I upgraded my Microvellum Toolbox 2019 to Toolbox 2020. The "Save and Redraw" command for the Parts Properties window worked correctly. I then installed Update 20.1.1012.641. But the "Save and Redraw" command does not re-open the Part Properties windowElevation Dimension Offset Global Variables
In Microvellum Toolbox 2020, it appears that the Global variables (G!Elev Dim Offset Baseline and G!Elev Dim Offset Vertical) that controls the offset distance the elevation dimension is from the cabinet does not work. I have changed these Global variablesHow to Permanently Change Grain_Matching_Identifier?
The way we sometimes number our products results in the Grain Matching Identifier using the same digits of, say, an entire room instead of for each individual product (eg, #123.01, 123.02, 123.03, etc. all get ID'd as "123"). When it comes time to processWould it be possible to add 2 fields to each hardware item for an image and a description?
We include a hardware page in our shop drawings that identifies the hardware used on the job. It would be very helpful if a field for an image, and another for the description were part of each hardware record. Then we could populate each item on theHow to have reports show mulitple items individually
Hi, I have a series of closets that are all identical. I am going to use the same cabinet number for all of them. I was wondering if there is a way for my reports to print out individual sheets for each unit instead of having one sheet and having a quantitytoe kicks missing image in reports
Hi, All my products in my reports for assemblies have an image but some reason some products, mostly toe kicks and counters along with fillers do not seem to have one. i checked the report and it is pulling from FaceFrameImages.WMF. What do i need toFatal error (instead of error message) when drawing invalid hardware
Any time I attempt to draw a product and there is an error or an invalid hardware item in the cell where a hardware name should be, AutoCAD crashes immediately (see attached image, which was on a HWR Array). I've only noticed this on the past 2 releases.Next Page
Toolbox BSB Survey
Have you been using Toolbox BSB? We'd love to hear what you think!
2026 INNERGY Summit & TechCon
Registration now open!
MVU eLearning
Grow Your Knowledge
Follow along with RJ as he takes you on a journey to build your foundational knowledge of Toolbox.
Follow us on: