LOOKUPTABLE()
Could a function be added for returning the LookupTable a cell is currently in? Similar to COLUMN() and ROW(). An example use for this function would be in the VLOOKUP formula: VLOOKUP("Text",LOOKUPTABLE(),COLUMN(),FALSE).Nesting cabinets in order of cabinet number
How do I change the nesting settings to issue cabinets in order rather than all mixed up? Thanks,Unable to Rotate Hardware
I am trying to set up machining for closet rods, and am currently having difficulty having my hardware rotate to the orientation I need. I can get it to move where I need it, but when I use the rotations it does not move. I believe it is stuck in theSheet estimates report, prior to issuing
HI there, I am a new new user with experience with other programs and I am hoping to figure out how to do a few things I could do with the last program I used. The first one is a material estimate. is there a way to get a estimated sheet count withoutAdd a Lead In Option to Straight Line Route Token
The straight line routing machine token is a very easy to use, compared to the extra time it takes to write a PLINE. The only downfall with this token is the inability to add a lead in to the route. This is an issue because we like to try and avoidCutrite Parameters From MV
I know this has worked in the past, I have seen it however i have never set it up. When your sending information from MV to Cutrite, the board information (sizes,description etc) comes in. I'm Looking for the field that contains the Cutrite OptimizationExtra routing by hinge with no machining.
I am having what appears to be extra routing on cabinet ends near the hinges. It is on the face 6 face of cabinet ends. It showed up a few weeks ago but I have not asked about it earlier because the is no machining code generated for whatever it is soHow do I disable Lock Drop Front Distance
I know this variable is getting the 1.5 dim from somewhere, but I can't find it for the life of me. We don't need our fronts dropped. Please help.Display Scaling for High Resolution (4K) Laptop Monitor
I recently obtained a new laptop that has a 15.6" UHD (3840 x 2160) display. I am having trouble getting Microvellum Toolbox to display correctly with Windows 10 High-DPI scaling. The Windows 10 recommended scaling setting is 250%, which is ridiculous because everything ends up so large, there is hardly any screen real estate. I have tried setting the scaling to various settings, but the only two that seem manageable are 175% and 200%. However, at those settings, Microvellum Toolbox is a bit of aPart not showing correctly after a cut out
Hi There, It is my second time I am seeing this problem recently. So i have a regular rectangular part. After making some cutouts in the center, the part is shown incorrectly with only the cutout part visible not the rest of the part. Anyway I can correctSeismic / CSIP standards
We are just getting started in MV and were wondering if anyone has created a method for predrilling the required pattern of holes into the backs of your cabinets to meet the Seismic(NAAWS) / CSIP requirements?Rear Shelf Pin Hole Settings
Is there a global setting to set the parameters of rear shelf linebore for rear shelf support? I cannot locate any such setting and I have seen it happen automatically when the width of the "max shelf span" is reached. Is there a stand alone setting toIs there a way to conditionally toggle a point on or off using an IF statement inside of a SINGLE vectors formula?
Is there a way to formulate a point to be either ON or OFF inside of a single VECTORS formula, using an IF statement, without needing any "|"& string stuff? In my testing so far, I was able to do so if I had 2 points and was only wanting to toggle betweenAnyone create Tab Pulls – ex: Mockett DP3
Has anyone spent the time and effort to setup and create Tab Pulls for doors and drawers? I am talking about the full setup of 3D parts, 2d drawings, and machining as well. I created the hardware part so we can select it and it shows on the reports but I want to go further and get the drawings added and even do the machining as well. I made the 3d part and 2d section/elevation but I am finding there are rotation issues now since these are back mounted and directional essentially. So, the setupOne token for multiple parts
I am trying to have a token than can route multiple parts at once. Is it possible? Am i the only one who could use it? Because our countertops are made from multiple parts for visual use in our sections. Sometimes we need to put a sink hole in it andHardware Machine Tokens Not Applying to Drawer Box
We've been trying to pre-drill through the drawer subfront for our drawer pulls. The simplest solution I could think of was to add a -pull to the drawer box subassembly, link that to our default, and set the origin to match. While attempting to do this,Missing Construction Line from SMT
Yesterday, I was working on a diewall using the Solid Modeling Tools. At the end of the day, I saved my work and shut down my machine. Today, part of the diewall is missing from the drawing and I can't figure out how to get it back. The diewall consisted of two construction paths because there are two section details, both a high wall section and a low wall section. When I saved and shut down yesterday, I had one of the products unchecked in the Tree View so that it was hidden. Today, I can't restoreHow to make all dados for back run through
I am trying to have the dados for the back on my sides run the past the top and bottom. Currently the dados stop 1/8" from the top and the bottom. The top and bottom dados run through I don't know why the sides would stop. I've attached photos. Is therematerial file bug
foundation library 23_0609 Set up a new category with new materials in the cutparts file. Assigned new materials to pointers. closed everything out. opened it back up later and all new materials had changed to .0312 decorative laminate. On the the rightDrawer Pull not changing
I'm new to Microvellum & need help. The attached photo is my problem, I have assigned a standard 4" wire pull to the job that I am working on , but the pulls on the cabinet drawers show a 6 -1/2" bar pull. I've looked everywhere that I can think to &Hardware Machining Tokens Disappearing
Good morning! I've been having a bit of an issue with custom pull machining disappearing out of some hardware files and not others. I'm on build 23.1.627.641 and my coworker who is on a 21. build doesn't have this issue at all (my workstation is the updateFEATURE REQUEST: Check if W.O. is currently open before creating new W.O. of the same name
If you have a work order already open and then attempt to create a W.O. with the same name as the open one, it freezes MV. Can there be a validation that won't allow it to make the attempt if you are in a W.O. of the same name? That way, it could hopefullyFEATURE REQUEST - Extruded Hardware that draws in 3D and optimizes to get a quantity
There are several ways I can imagine going about creating and allocating "extruded hardware" using cut parts, solid stock, hardware parts, molding, profiles, or some combination of any of those. We have tried 3 approaches so far: 1) Creating cut partsEBP/SMT/SMA functioning in various "Builds and Libraries"
Seeing that there has been no further "development" of these modules, will using various "Builds and Libraries" have different drawing outcomes?. I.E. the problems that exist in using Build 23.1.3298.641 Library v045.0 the same when using Build 23.1.0502.641Importing Formula Material Via Spreadsheet
I a working on a new library setup, and I wanted to know if there is a way to import in formula materials like you can do with standard materials via the M spreadsheet?L shape solid rail
Hi everyone! I need to place L shape solid rail to my base cabinet, but I wish for my cutouts to be only pockets instead of full corner/panel cutouts. But as I was looking for those cutouts settings, I find myself unable to find any part that they mightHinge Dist From Side
Hi, As attached, I am trying to automate "Hinge Dist From Side" a little more. I am struggling to use the 'SEARCH' function to read 0mm or 3mm in the appropriate column. My understanding of this function is limited and it may well be I am using the wrongtoolfiles - component to foundation
I'm in process of importing my toolfiles& processing stations from a component library into a foundation library. Assuming that should work?Reversing a vector formula for grain direction
We are running a custom library of products, and write new custom vector formulas daily. The panels that we are working on need to be able to be switched between horizontal and vertical grain. This causes us to write the vector formula twice. one versionNow Hiring - Microvellum Draftsman
Building dreams is our passion! If you are authentic and passionate about what you do, and want to grow with an amazing company, then please keep reading. About Us: JK2 Scenic is a second-generation family-owned company that provides exceptional full-serviceLock hardware machining token
Hello, 1-i add machining token to lock hardware but i need pocketing drawer sun front face. How could i fix it?How are companies handling the drop for the “Lock Drop Front Distance” on drawer boxes?
The basic setting in the spec groups is a fixed number based on weather or not a lock is present in a drawer. In our case it is set to 1”. For the most part this works but there are many times it could be better. I am wondering how everyone else handlesToe kick drawers push open underneath the cabinets
Hi does anyone know about how to add a toe kick drawer push open that goes under the base cabinet in microvellum? and i have attached a little pantry with some requirements i am not sure on how to exactly do that.FEATURE REQUEST: Nest Product in this Drawing
It would be very helpful to have a tool that would allow you to select products and quickly create a nest inside the current open drawing, without having to create a "temp" work order to see if a product will nest correctly. (I'm sure many of us don'tCORNER NOTCH drawing in 3D but not nesting
Recently, we had a job where 2 of these notches (identical in size and tooling) were used on adjacent corners of the same panel, and 1 nested (combined with border) and 1 did not nest at all (neither combined nor separate). After looking into it, I realizedUsing Excel to create an XML file
Has anyone used excel to create an XML file to import into Microvellum? I used the Microvellum Foundations Sample XML to map my excel document but I'm getting an error when I try and export it from Excel to an XML file.To those who are miterfolding Solid Surface, what are you doing on an inside corner?
Say for a 'L' or 'U' shaped top?Solution to drawer calculator issues Part 1 (Individual Subassemblies)
I know there is a different thread asking for ideas for solving some drawer calculator issues, however I thought it best to make a new post to suggest some in depth solutions I have made. Before I start, I should say that most of this won't make senseAttribute Variables visibility determined by layer use in drawing
I was wondering if there was a method I am not aware of that I could find if an object or anything in the current room is drawn on a particular layer and use that to set a variable to say a different thing. I am setting up an automated materials pageExtruded product builder - Curved Bench
We are currently looking at producing cutable curved pieces to build a curved bench (See images attached) as per the design. The issues we are running into is our extrusion runs into our walls. Has anyone ever created a product similar to this? Any tipsNext Page
Toolbox BSB Survey
Have you been using Toolbox BSB? We'd love to hear what you think!
MVU eLearning
Grow Your Knowledge
Follow along with RJ as he takes you on a journey to build your foundational knowledge of Toolbox.
Follow us on: