Not Letting Me Add Products
We installed Microvellum to a new PC and imported old configurations. I am currently having an issue where it won't let me add in-house designed products from the draw feature to my sketch. I had some kind of error/warning pop up the first time I wasCustom Source Woodworking Is Hiring
Are you someone with Micrevellum Software experience looking for an opportunity to join an innovative team? We are a custom commercial woodworking shop where no two projects are alike and are looking for qualified individuals to join our team. Currently,FEATURE REQUEST: Add Conditional RANGETOSTRING to return only certain values in the data set
The RANGETOSTRING function can return a list of values either horizontally or vertically and be offset to look in a different column or row. But, it cannot evaluate certain cells in the range and return only conditional values from an offset range asHang-Up on Calculating Product Machining
Has anyone ever run into a system hang-up when trying to draw analyzed products? The analyzation seems to be done without any issue, but as soon as a location is selected to place the product the system hangs with the status bar reading "Calculating ProductPrompt layout
I am working on creating a custom die wall product and as I add all the prompts that I want, it is making a pretty long list. There is a lot of room on the the prompt screen for these, that isn't used. How can I create 2 columns of prompts instead ofWizard text field improvement
Could we get some refinement to the wizards?I'd like to see what the material being used is. When the name exceeds the length of the text field there isn't any visual like windows has when you hover over it to show the extent of the field. This makesWood drawer box machining
We are currently running MV Toolbox 2021, and we are struggling with the wood drawer box from the library. The smaller drawer boxes, 150 or less in height, will not show as dado & screw, whereas the large and medium drawers on the same cabinet will. TheCustom Pull holes off center on drawers
Need to drill holes for a pull with different center to center distance than what is available in the library. (160mm) - I change pointers to Custom Pull - Copy an existing Pull to project level - Modify machining token for pull - Apply modified pull to Custom Pull token Holes drill at the correct distance however on the Drawer Faces they're off Center. What am I missing? Thank you.Having multiple tools under one tool number for interchangeability
I wanted to know if it is possible to have a more than one tool programed under the same slot for single use operations. IE tool 10 I have a 3/16" comp bit, and 1/16" bit depending on the operation.Formula Driven Hardware (Pulls) - For Component Library
Is it possible to create or have a Formula Driven Hardware Pull in the Component Library (48_0)? If so has anyone done this and how would I go about getting it setup? More and more custom jobs are requesting special pulls that we don’t have in our database,Screw Drilling Is Not Showing Up
I am trying to assemble cabinets with screws predrilled with a 3mm drill bit. I have my machining settings set to drill a pilot hole in the applied backs and also have screws drill also. Currently the only way i can get predrilled screw holes is by settingFEATURE REQUEST: Create a 4-sided cutout machine token with the option of radiused corners
This machine token would get so much use I believe, if we could do away with the bulge list for a simple 4 sided cutout it would allow a simple parametric machine operation rather than quite a long vector driven formula.Duplicate Tree Category structure as Folders in the Factory DB job on Disk
I am pretty sure this has been asked for before and perhaps it is within the latest build, but it would be nice if the Categories within the tree were duplicated as folders within the Factory DB job on disk. That way when looking for dwgs on disk youPart Missing from Spreadsheet
I'm hoping this is a basic question. I have just finished programing a cabinet and checking it over before saving it to the library. While looking it over I found that a part, 'Left Side', is showing in the model, and showing in Part Properties; however,Solid Model Analyzer Calling Incorrect Tool When Analyzing Miters
Hi all - Some quick setup information: -We are running the Foundation Library, latest release (1102) with Toolbox 2022. -T103 is our 3/8 compression spiral, used as our default routing tool and border router -T107 is our 91degree miter bit. It has theAutomating Work Order Processing
If we build a set # of custom MV products, can we automate the work order processing? (We have the products already built in MV and the dims never change.) I looked at the import/ export functions for MV, and I'm not seeing anything that can be used toXML Import Parts, Hardware, and Subassemblies to Library Products
It seems to be possible to import Parts and Hardware on a product level using XML importing but appears to only work when the imported product name doesn't match any existing products in the library. Is it possible to import a product with parts, hardware,Die Wall Stud Location
I am working on modifying the stock extruded die wall to make it a bit more usable for our environment. The question I have is regarding stud placement. Currently the system determines the number of studs and placement based on wall length, assuming IDIsplay vs Cut parts
So I just created a subassembly for the PLAM that will be going on to our countertops, but i need them to cut 10mm oversize on each edge without it showing that oversize in the model. how do i go about doing this?Machine Tokens and Prompts
I have created 4 new machine tokens that i need to associate to checked prompts on my countertops, how would i go about doing that?Custom Assembly Report
Is there a way to filter parts or products that have a "Comment" into a unique report? Looking to create a Custom Product Detail report for products or parts that need to be built by a more knowledgeable builder in our shop. Kind of like the Product DetailPLINE/tool relation
I have a dumb question I should know, but don't. I know on a dado, pocket, or cut out the the tool's diameter is taken into account, hence a lead on a through dado so you don't have rounded corners at the edge of your part. But if I apply a machiningSuggestion - Edit Product List Item Number for Multiple Products
When we create an exam room multiple times, such as a quantity of 20, we create 20 empty product lines within a "shipping" phase within the spreadsheet for each product within that room (20 base cabinets, 20 upper cabinets, etc). Each line is assignedWall panels - how do you do it?
I am going to be doing my first wall panel project in Microvellum shortly. Before I get too deep into into the project, I am wondering how others have set thier libraries up to handle this. The project consists of wall panels, soffits and colums. NonTapered Route from BENDING Token Not Nesting
I put a ticket in for this, but it was marked "solved" without fixing my issue, so I'm posting here... When using the tapered option on the bending token, a part draws correctly in 3D. It ALSO shows up with the correct route in the 2D Part Editor, whichLeg Levelers?
How do I change the hole for the leg leveler bases from a .3937" (10mm) hole to a .4095" (10.4mm) hole?Having issues with Virtual Routes not always working
We have a removable top panel that we use when installing recessed can lights into a cabinet. We built the panel as a subassembly that simply gets turned on and applied to the openings and has options for the number of lights. When we do this we alsoDelete custom products from library
We have added a few custom products to our library and over the last few jobs have made some improvements to them, and want to delete the old versions. How do you do that?Subassembly inserts
Hello, I have created a new "Rollout en U" Subassembly now I would like it to appear in my "subassembly inserts". what should I do?How to add more than 1o shelves
I am designing a tall cabinet for an art room, and it contains 23 adjustable shelves. Unfortunately, MV only allows up to 10 out of the box. How do I get it to allow me to add more? I searched the forum and came up with an old thread that was a yearTurn off part labels for a product
With our plywood plinths, we add in an assembly block product. This can have a quantity of 50 or more and uses the remainder of the plywood sheets. The assembly blocks do not require part labels. Is it possible to remove this at the product level or through"E" Column in Cut Parts
Is it possible to leave this Column Blank? Or have it used as a reference to the "Map Parts" Column? We are currently using this column to calculate which machine will be required in optimization, then using the Map Parts as a VLOOKUP to match the machineAximat 300 hinges?
We have a job coming up for '23 that is going to require use to use the Aximat 300 hinges. (344.06.800 cup / 344.06.920 arm) I am just wondering if anyone has a working setup for these hinges that they would be willing to either share or answer somebetter way to make fomular hardware part
I have one part number, it is very similar but just has different language or connection or type or length, then it will have tones of part number. But we need the part number for price and report purpose. I am thinking use fomular hardware, but i amSolid Model Analyzer - Lag
I'm not quite sure what is going on, but recently the Solid Model Analyzer has refused to work smoothly. When I go to analyze solids to make a product the program will hang for quite a long time, up to 5-10 minutes. Then it will ask for each solid material.Standard Machine Token Parameters??
Where can I find the parameters for the standard machine tokens? I currently have to change the tool number every time I use one.Extruded Hardware
I am trying to add a few pieces of extruded hardware for a display case I am making. The item width and heights will be based on the overall display case width and height. I have tried adding the items as a hardware item, but that leads me to a staticMaterials for Reception Desks, etc
So I do not use any solid modeling tools, I use the stock extruded products for my die walls etc. A large portion of the time the construction methods are the same but the materials change. While the materials are pretty easy to designate for the dieFEATURE REQUEST - Hardware "Drill From Opposite Side" on BORE Token
I do not see that the option exists to "Drill from Opposite Side" on hardware, but it would be very helpful for us if it did. Since it is on other machine tokens, is it possible to add it to the hardware ones? Since this option doesn't exist, we areAdjusting Grass drawer front connector
I would like to adjust the bore of the grass nova pro scala front connecting bracket from 12mm to 13mm to the drawer front. I used to go to "lookuptables" but the drawers seam to be no longer there. Can some one point me in the right direction on whereNext Page
Toolbox BSB Survey
Have you been using Toolbox BSB? We'd love to hear what you think!
MVU eLearning
Grow Your Knowledge
Follow along with RJ as he takes you on a journey to build your foundational knowledge of Toolbox.
Follow us on: