reports error
When I process a work order I do not get any report in the report group. Also, if I try to manually generate a report I get this error. I've tried rebooting, logging out of the server and reconnecting, deleting the work order. Nothing works. Any ide
MV Job available in North Georgia
Five Star Architectural is a commercial millwork business in North Georgia. We are seeking full or part time (In-House or Remote) employment for drawing submittals through Microvellum. Further information in regards to expectations and compensation will
Microvellum Engineer
Linear Fine Woodworking in Phoenix, AZ is looking to hire a full-time Engineer to perform CAD/Microvellum engineering and drafting for our High-end millwork manufacturing company. Are you experienced with Microvellum? I This Microvellum position earns
Why is "Creating A Product Starter " so different in both CCL ands FL
In FL I do not see the ability to add the correct "Nested Subassembly" why aren't Bay Position and Comments loaded??? In CCL This does not happen!!
Workbook parameters
Good morning, After multiple tries to find the info, I am reaching out for help. Please refer to the attached link for reference. Would someone provide the links to all workbook parameter examples? Introduction to the Global Workbook Example: I would
Metafile drawing tokens
I just noticed that there is a DRAWHDIM & DRAWVDIM token for metafiles, whereas those two are not a normal option for other areas. Could someone please explain this?
Missing Workbooks Foundation
Did I do something wrong? AGAIN!! LOL
Fields
Hey All hope everyone doing good. i have a question regarding fields inside reports under bill or materials you can populate all hardware and qtys is their a way i can get this populated data into a drawing title block that can go into a table or anything?
Template set up
Super simple one I couldn't quickly find in a search...how do you set a 90 degree line at 0,0 when a new drawing/project is created? Want to set it up to help keep my drawings neat!
Change corner in where the sheet gets loaded to on nest bed
i have done a quick search with no luck . I need to change my corner point for cnc to where the sheet gets load to. I am currently top left and need to go to top right . I have been told to change from origin 1 to origin 4 but i cant seem to find it ,
Is there a way for doing Barn doors?
I would like to have Barn doors here, with hardware and everything if possible, but I am not being able to create it (the door will replace the normal doors, they are there for material count purposes since I am not able to make barn doors, yet).
Drawing Token Issue
Seen lots of users that love using drawing tokens. I'm at my wits end trying to get them to work correctly. The problem I'm having is I add a drawing token and get them working correctly. I go in to add another or even modify one and when i exit it overwrites
J Pull
Can someone assist us with setting up the machining on the J Pull handle. Once J Pull is selected we can't find where the machining lookup table is. We need to add our tool to the lookup for it to machine correctly
Hinges not showing in the hardware cost for FF cabinets
Having problem with FF cabinets not having the hinges in hardware cost. They "exist" in the product, but not on my estimate. Any idea of what is wrong?
Section Tokens
Any help is greatly appreciated. This is CCL
CALLING ALL J.I.T/CELLULAR GURU's
These attachments come from a shop that has asked me to "Outsource" drawings for them.. I am reluctant to produce the work for them because of how this template bogs down my computer speed. There are 25 pages to the debug report. What are the option
XML Import Parts, Hardware, and Subassemblies to Library Products
It seems to be possible to import Parts and Hardware on a product level using XML importing but appears to only work when the imported product name doesn't match any existing products in the library. Is it possible to import a product with parts, hardware,
Dashed line in plan
How could I force MV not to place a dashed line in my plan view?
Unable to add a comment to edgebanding and have it show up in the Work order.
We have a Diagonal corner cabinet that I setup to Miter the front and cabinet ends to align. (Think residential style) When I setup the parts and machining I changed the formula for the edgebanding. IF(Mitered_Face=1,"MiteredE!Cabinet_Body_Edges_Wide_Span,Cabinet_Body_Edgeband_Material_Name)
Wall cabinet cross section
Every time I cut a section in an upper, there is a dm that appears to go to the top. Could someone point me to the correct dim token and its location? There are 3 tokens in the cross-section tab, but I have 7 dims appearing.
Drafting Services
Outsourced Drafting Services. I am a qualified Cabinetmaker with 10+ years of experience. I can help with Submittal, Production drawings, Library development, and Hardware integration. I have an array of 3D hardware to take any project to the next level
Saving Room Component (Wall) back to Library
I made some changes to the Room Component (Wall) in the edit design data and want to save this back to the library so all user within our establishment can use it. My question is how do I save these changes? See photos below. With this we are able to
Component vs Foundation Library
We are looking to move to the Foundation Library. My question is how easily can we access old legacy jobs drawn / modeled in the component library?
Return a subassembly line
Hi, Is there a way for a subassembly to know which line it is on within the product? For example, i would like the subassembly Component Doors to know that it is Bay 1 via a lookup from within the subassembly: Thanks!
MV performance
I notice my MV is running slower and slower. What else we can do to improve the speed?
Part Grain Direction - None
There are times when a part grain doesn't matter even though it's made out of a grained material. For example, toe kicks and stretchers could have the grain running in either direction if it meant better yield on the sheet. Would be helpful to have an
Microvellum Drafting Solutions
Microvellum Drafting & Engineering Solutions (Drafting Service) We could be the one last search you would make since we make sure that for every client we got, we follow your standards & ensure the project delivery On-Time with Accuracy & Precision. Doesn't
MICROVELLUM DRAFTERS/ DETAILERS WANTED!!
Provincial Store Fixtures Ltd. 910 Central Parkway West Mississauga, ON L5C 2V5 www.psfltd.com "NOW HIRING MILLWORK DETAILERS" Reports to: Engineering Manager Start: ASAP or 2 weeks from Job offer Location: Mississauga, ON PSF is a leader in the industry
MICROVELLUM SENIOR CNC PROGRAMMERS WANTED!!!
Provincial Store Fixtures Ltd. 910 Central Parkway West Mississauga, ON L5C 2V5 www.psfltd.com "NOW HIRING SENIOR MILLWORK CNC PROGRAMMER" Reports to: Programming Manager Start Date: 2-weeks from Job offer PSF is a leader in the industry with over 45
Help With Plotter Margins
I am looking for some help with plotter margins from the Gurus in the community. After upgrading from Toolbox 2021 to Toolbox 2022 I have noticed that when we print to the default plotter (PDF Creator) the margins are incorrect in the PDF and are cutoff
ADA Side panel
Is there a reason why its cut/routed at 91° instead of 90°
2D Wall Drawings
In the Wall Prompts under the Obstructions Tab there are options to add a Bulkhead and Column. I needed to add 2 more columns to my wall so I copied all the prompts of the original. Everything shows up in 3D correctly but not in the 2D elevation of the
MV Walls
Other than right-clicking in the product viewer and redrawing walls, is there any other way to identify walls in the database? I am trying to identify if cabinets are not associated with a wall automatically.
Importing projects BIG PROBLEM
BIG PROBLEM with importing projects. I have been backing up projects weekly. I decided to import one of the backups so I could retrieve some products that were ruined. After I imported the project which had been renamed, My project level materials in
Technology on the Shop Floor - Open Discussion
Many companies are faced with a myriad of challenges on the shop floor. Bottlenecks for specific processes, misinformation - or at least poor information/communication, material handling, strategic flow of material and parts, and so on... So, what kind
MV Bookshelf - January 2023: "Atomic Habits" by James Clear
Holy moly!!! I nearly dropped the ball getting this discussion started - my apologies. 2023 couldn't start off with a better book. With the new year, many people start off with goals and resolutions. Sadly, as the weeks and months go by many of us fail
How are you utilizing your scrap
We have a lot of scrap that piles up around our beam saw and nested base. Sooner or later it takes up too much space. At that point it's cut up on the beam saw and thrown in the dumpster. How is everyone using up your scrap? Ours is particularly bad because
Changing Screw Diameter Hole
Just got the Foundation Library and I cannot change the construction holes to 3mm. Can someone point me in the right direction?
New Toolbox Release Available Today! | Build 23.1.0112.641
We are happy to announce that the update to build 23.1.0112.641 is now available! The latest Toolbox Release resolves issues regarding ERP Estimating, Part Properties, the Processing Center, Single Part Editor, and Nest Drawings. For more information
Drawer to False front
How would I replace a drawer with a false front?
Next Page