How do you "revert" subassembly changes from Library Designer to past projects in Foundation Library?
We are using foundation library, and maybe some have noticed, dovetail drawers are not in there. I have added a global and changed the cut sizes in library designer to reflect what we need to construct dovetail drawer boxes. I did this very recently and
Solid Model Analyzer not picking up on 3mm material
I'm having issues with getting a simple countertop working, wondering why the 3mm is not getting recognized here.
Adjustable Shelf Conflict
When I run a tall cabinet with adjustable shelves, and one of the shelves is near a cabinet door hinge, we get a weird route near the corner of the shelf. Is there a way to avoid this? It is the depth of the hinge cup route.
Weeke Barcode Mirrored Field Placement
Does anyone use barcodes to place mirrored parts on a Weeke BHX 055? Stiles machinery tells me MV needs to add a 1 for normal field and 2 for a mirrored field to the end of the barcode.
Divide an Arc
I'm looking for some tips on how to divide an arc. I am using the "DIVIDE" command, but it doesn't seem like it is doing anything. I also read that after the "DIVIDE" command, you should use the "DDPTYPE" command to get the division points to show. When
Trash Pull Out
I'm sure others have done the same. But, I made a simple trash pull out for customers due to the supply shortage on the KV ones that we normally order. Curious to hear what others do and what other members cnc in house versus outsourcing.
Error: Index was outside the bounds of the array
Every once and while we get an item that constantly errors upon edits and redraws "Index was outside the bounds of the array" Rebuild the walls, rebuild the product, make adjusts and it recreates the item but continues to error. Any ideas of what to check
Add Read Only on MV Files, CUTX, CTPX, EDGX, HWRX etc
I am not talking about DWG read only, we already have that from AutoCAD. I am talking about having read only built into MV for it's files to prevent two users from being able to open a product, a subassembly, a spec group file at the same time and make
2D Section Dimensions
When I draw a 2D cross-section of a product, the dimensions for the doors and drawer fronts are anchored to the face of the cabinet rather than the face of the door or drawer front. Is there a way to change this?
Added Zero layers while working in EPB
Can someone explain how/why these layers are automatically being created, while I an working in EPB?
SMA Not working Correctly
We are experiencing a issue when using SMA See attached. It seems to be kicking the part out slightly skewed? The Previous version worked fine for this? Its showng in the Part properties as well.
FEATURE REQUEST: Pocket Mortice Token
The Pocket Mortice Token is great but I would like it taken to the next level. I need this token to have the ability to adjust the route depth and be able to adjust the edge bore Z height. This will make it so this token can be used for 1/2" materi
Pocket Mortise Token
Has anyone used the pocket mortise token in MV? It shows it as an associative token. I started playing around with it and can't get it to work. Anyone have any success using this token? The reason why I'm asking about this token is because production
Microvellum Saw Optimizer Reaching Maximum Iterations
We use Microvellum Saw Optimizer, and I ran into this message while processing my parts in the processing center. "Microvellum Nest Optimizer Reached Maximum Iterations Without Results" I ran into this issue in the processing center with a job of around
Changing Shaker Doors via Sub Prompt.... Sloooooow
Is anyone else experiencing extremely slow population when making changes to a nested sub assembly? To change a shaker door to say Face Panel Qty from 2 to 1 takes up to 2minutes every time. I've done it via the spreadsheet but when I refresh the product
Help!!!!
Unfortunately, I am not the MV wiz. I just spent almost 3 days working on a project with 13 rooms all to get ready to plot the drawings and MV went into "thinking" mode and never plotted them. I am notorious for saving every 5 minutes or so when working.
Drawing Tokens - does it have to [END]?
According to the Drawing Tokens section of the Knowledge Base you need to add [END] at the end of the list. Is there a reason for this? None of our products have this. Is something going on during the processing of drawing the Elevation/Section/Etc.
In house Microvellum Engineer needed 21 Feb 2022 05:28 PM
Commercial cabinetry and millwork Microvellum Engineer CLM is currently adding to existing staff due to exceptional and sustainable growth. We are looking for qualified and motivated project engineers, s who are willing to work in a fast-paced, detailed-oriented
Drawer front adjuster machining type
Is there a global variable to change how the holes for the drawer front adjuster are machined, i.e. routed instead of drilled? I called myself looking several times, but haven't found one. I'm having to go into the nest drawings and change them to routes
Wish List
My I would like to see Microvellum add this list: First on my list is optimization,l MV does a pretty good job, especially with square or rectangular parts, but when you start to get odd shaped parts things can go wonky. What really exasperates me is
Sink cutout
Hi there, How can I cut out the sink on 'Countertop With Substrate' which is the model from the library? Actually, I edited it with the custom sink and set up the sink cutout from 'Prompts for Sink'. However, it does not work. So, when I use ‘viewbase’
Limitation of Custom Cabinet in Foundation Library
Hi, I have been peering at different versions of Foundation Library and am very looking forward to making the move. But it seems it has limitations for some cabinet configurations. I tried a few ways to make the attached cabinet and have no luck yet.
Joinery
Can anyone tell me how this would be joined? I have been a cabinerd for so long and have seen this in a couple instances and just can't figure it out. It seems to be edge banded material cut at 45 degrees but how is it solidly put together? No there are
Workbook Designer / UI Update Question
If I go into Workbook Designer to add a bunch of comments to some materials, for example, after I save and close WD, I'll go and check through the other interface that the comments show up but I never see them. But I can go back into WD and see the comments
Engineering & Drafting Services
Hello, We provide engineering/drafting services and can help with any needs you might have with casework design/manufacturing. We have over 20+ years’ experience in drafting/manufacturing for many different casework shops. We can send examples of some
FEATURE REQUEST: Hardware Material Collections
I like the idea of having the premise of the "Material Collection" available for use on hardware. I use hardware arrays a lot in our engineering and would like to have screws allocate automatically along with clips, brackets, etc. It would be nice not
SMA and mutli layers ?
I have a group of parts that I used the SMA tool and converted to a product . The part grouping is coming in as one layer, which is fine. From here I would like to color code different SMA products for my organization products, visually. When I change
KV 255 Standards
Maybe I'm not doing something right, but is there a way to determine the length of the KV standard. We have a customer that is particular about the length being 2" from top and bottom on sides. Tried changing dimensions in shelf standards options and
Re-sharpen CNC tools
Hi There, Just want to know what you guys take on having someone else sharpen your old CNC router bits and reuse them. Does it worth it? We are a shop with four CNC machines and we order lots of bits. Management seems doesn't really care but those new
ElvNoDim prompt issues
I'm not sure if I'm doing something wrong or if it just doesn't work. I have tried this prompt on 2 products so far and have had mixed results. Kicker base product will add an extra dimension when turning this prompt on. It doesn't work at all on the
Shaker door Multitool vs associative parametrics
Im trying to setup an automated tool for shaker doors. I see it might be tough as im mixing a pocket and just boarder routes. at our shop we do 1/8th mutlipass 1/4 deep first, follow that up with the 3/8ths and then the diamond tool to hog out the
Idea: Auto load Rooms/Cabinets when selecting a Recent Workorder Name when creating a work order.
It would be great if when we were in the “Work Order Creation” window and we use the Select Recent Name Option; if it would automatically reload all the Rooms/Cabinets included in that work order. For us this doesn’t happen often but when we do catch
New Release Available Today: Build 21.2.0209.641
We are happy to announce that the update to build 21.2.0209.641 is now available! This build features fixes to Activity Tokens, Flatshot Tokens, and Scrap Management. Read the complete Release Notes for this build. How to Get the Update Microvellum
Is it possible to create twisted die walls with Extruded Products Builder?
Hello, Usually Die walls follow one curve with top and bottom plates being parallel to each other and maybe offset of each other, with equal length studs. I have a situation were Top and Bottom plates are the same but they are slightly rotated of each
New Server Specs to support MV
Greetings – I’m a sysadmin tasked with spec’ing a replacement server to support Microvellum (amongst other roles). I have reviewed the “Microvellum Server System Requirements” document at https://community.microvellum.com/portal/en/kb/articles/microvellum-server-system-requirements
Autocad/Microvellum Engineer
* Competitive Pay * Work/Life Balance * Valued Employees * We are the premier manufacturer of commercial millwork and custom fabrications in South Central Kentucky. Responsibilities: - Designing casework, counter tops, and custom pieces (displays, reception
Door/Drawer Bay Insert
It would be nice to see a Drawer over Door bay insert added to the master designer base cabinet in the foundation library. this is something we use regularly in our current library vanity cabinets.
Part nesting , change base point?
I did a quick search but came up empty handed . Is there a way to prioritize CNC part nesting to use the top left point as a point of origin for parts on sheet goods? As is we are using the standard lower left point.
What ERP systems are people using?
Hey everyone, I'm not sure if MicroManager is still current or available, but I was curious to know what ERP systems other businesses are using and whether they would recommend them or not. Seems as though it might be a challenge to find something that works well for the Front of House, Drawing, Purchasing, Scheduling and Accounts teams....... Any advice would be appreciated, especially from anyone who might be running something in Australia! Cheers.
New Foundation Library Release Available Now
We are pleased to announce that the latest release of Microvellum's Foundation Library, Build 22.0203 is now available. This build features a number of data fixes to improve user experience. Read the complete Release Notes for this build. How to Get the
Next Page