2024 Builds
Toolbox Release Notes | Build 24.1.1125.641
The following release notes apply to Toolbox build 24.1.1125.641. IRIB Setmill Location Fix Fig. 1: Setmill being moved to the start of the route (top) rather than at the center of a straight line, as intended (bottom). There was an issue reportedly ...
Toolbox Release Notes | Build 24.1.1105.641
The following release notes apply to Toolbox build 24.1.1105.641 Nesting Fix Fig. 1: The fatal error that would occur during processing. There was reportedly an issue that occurred when clients attempted to process a work order using the nesting ...
Toolbox Release Notes | Build 24.1.1030.641
The following release notes apply to Toolbox build 24.1.1030.641 Routing and Profile Fixes Several issues were found with routing and polyline paths: Fig. 1: Horizontal routes off of a part disappearing (left) and appearing correctly (right). When ...
Toolbox Release Notes | Build 24.1.1010.641
The following release notes apply to Toolbox build 24.1.1010.641 Biesse Winstore Fix Several issues with the Biesse Winstore plugin have been resolved: There was an issue that would sometimes occur wherein materials that were intended to stack wound ...
Toolbox Release Notes | Build 24.1.1001.641
The following release notes apply to Toolbox build 24.1.1001.641 HBore Toolfile Fix Fig. 1: The location in the Toolfile UI where the error would occur. There was an issue reported with the functionality of the Horizontal Boring Machine setting in ...
Toolbox Release Notes | Build 24.1.0913.641
The following release notes apply to Toolbox build 24.1.0913.641 Copying Fix Issues were reportedly occurring when users attempted to copy projects and rooms: When attempting to copy a and move a project, it was sometimes the case that products being ...
Toolbox Release Notes | Build 24.1.0906.641
The following release notes apply to Toolbox build 24.1.0906.641 SMA Fix Fig. 1: An incorrect circle (left) and the corrected version of the same circle (right). An issue with SMA analyzing circles in an erroneous manner has been resolved. It was ...
Toolbox Release Notes | Build 24.1.0815.641
The following release notes apply to Toolbox build 24.1.0815.641 Drawer Box Height Fix An issue centered around drawer box calculations has been resolved. When using a drawer calculator to calculate the height of a drawer box or drawer face in a ...
Toolbox Release Notes | Build 24.1.0805.641
The following release notes apply to Toolbox build 24.1.0805.641 Material Flip Fix An issue with materials encountered when using MV Server has been reported by users. When attempting to process materials that have any type of flip enabled, it is ...
Toolbox Release Notes | Build 24.1.0719.642
The following release notes apply to Toolbox build 24.1.0719.642 900 Tools Fix A recurring issue with 900 tools being used in an incorrect order during certain operations was reported. The issue would manifest as tools switching back and forth during ...
Toolbox Release Notes | Build 24.1.0703.641
The following release notes apply to Toolbox build 24.1.0703.641 Product Comments Fix An issue with product comments in has been resolved. It was found that in older builds (pre-2023), when a formula driven product had comments placed into it and the ...
Toolbox Release Notes | Build 24.1.0625.641
The following release notes apply to Toolbox build 24.1.0625.641 Ramping Fix There was reportedly an issue occurring with ramping wherein ramping would not function properly when utilized on a 4-sided cutout machine token. When attempting to ramp ...
Toolbox Release Notes | Build 24.1.0611.641
The following release notes apply to Toolbox build 24.1.0611.641 SMA Fixes Users reported two issues centered around the Solid Model Analyzer, specifically centered around routing on parts that used the SMA. Fig. 01: The midpoint of an arc going ...
Toolbox Release Notes | Build 24.1.0528.641
The following release notes apply to Toolbox build 24.1.0528.641 Part Report Fix Fig. 1: Correctly flipped face 6 report image (top) and incorrectly flipped face 6 image (bottom). An issue would sometimes reportedly occur when a single part was ...
Toolbox Release Notes | Build 24.1.0513.641
The following release notes apply to Toolbox build 24.1.0513.641 PTX Saw Fix Figure 1: Code generated on a PTX Saw with incorrect corresponding values (left) and corrected values (right). An issue was reported wherein work orders assigned to the PTX ...
Toolbox Release Notes | Build 24.1.0503.641
The following release notes apply to Toolbox Build 24.1.0503.641 3D Representation Fix A 3D representation issue with certain products (such as corner cabinets) was reported. Some clients found that when drawing these types of products, polyline ...
Toolbox Release Notes | Build 24.1.0430.641
The following release notes apply to Toolbox build 24.1.0430.641. G-Code Path Fix An issue was discovered wherein G-code would sometimes not generate along the correct path, with files never being created in secondary folders, even in circumstances ...
Toolbox Release Notes | Build 24.1.0416.641
The following release notes apply to Toolbox build 24.1.0416.641. Maestro Toolfile Fix There was an issue with Maestro SCM Toolfiles reportedly experienced by some users, wherein the labels output by autolabeling would be in incorrect positions, an ...
Toolbox Release Notes | Build 24.1.0409.641
The following release notes apply to Toolbox build 24.1.0409.641 Saw Delimited Processing Station Figure 1: The Saw Delimited option in a custom processing station. New options have been added to saw processing stations to allow for control over data ...
Toolbox Release Notes | Build 24.1.0328.641
The following release notes apply to Toolbox Build 24.1.0328.641 Fillet Token Fixes Issues were discovered in the use of fillet tokens on products that also had the IRIB setting enabled: Some users processed work orders with rounded parts, which ...
Toolbox Release Notes | Build 24.1.0318.641
The following release notes apply to Toolbox build 24.1.0318.641 Shadowline Fix Figure 1: Shadowline shaping issue (left) and fixed (right). There were reports of users experiencing issues with products having incorrectly shaped shadow lines when the ...
Toolbox Release Notes | Build 24.1.0312.641
The following release notes apply to Toolbox build 24.1.0312.641 Processing Station IDs Processing stations will have IDs added to them as an option within the Toolbox UI, to better distinguish between different processing stations. Perfect Graining ...
Toolbox Release Notes | Build 24.1.0306.641
The following release notes apply to Toolbox build 24.1.0306.641 Destroy Offal Fix Figure 1: Destroy Offal arc part issue. There was an issue reported by users utilizing nesting with the “Destroy Offal” setting applied during processing. ...
Toolbox Release Notes | Build 24.1.0227.641
The following release notes apply to Toolbox build 24.1.0227.641 UI Fixes Figure 1: Expansion issue with Function Arguments window. There was a noted issue regarding the Function Arguments window in the Formula Editor: when one expanded or increased ...
Toolbox Release Notes | Build 24.1.0219.641
The following release notes apply to Toolbox build 24.1.0219.641 Copy Product Information Fix An issue has been reported by some users, who found that when attempting to copy and paste their product information by using the “Copy Product Information” ...
Toolbox Release Notes | Build 24.1.0213.641
The following release notes apply to Toolbox build 24.1.0213.641 Edgeband Thickness Fix An issue was reported centered around the Edgeband thickness of products using formula driven materials from their specification groups. When products were ...
Toolbox Release Notes | Build 24.1.0207.641
The following release notes apply to Toolbox build 24.1.0207.641 3D Drawing Fixes Several fixes have been applied to specific issues users reported centered around 3D drawings: Users reported an issue when creating products with interior corners: ...
Toolbox Release Notes | Build 24.1.0131.641
The following Release Notes apply to Toolbox build 24.1.0131.641 Solid Modeling Fix Some users reported that there was an issue with the Solid Modeling Tools and Solid Modeling Analyzer, wherein an error would occur if they attempted to access ...
Toolbox Release Notes | Build 24.1.0119.641
The following Release Notes apply to Toolbox build 24.1.0119.641 Exported Toolfiles Fix Users reported an issue with exported Toolfiles, wherein exported .tlfx Toolfiles were incapable of being opened within the Workbook Designer. This issue has been ...
Toolbox Release Notes | Build 24.1.0112.641
The following release notes apply to Toolbox build 24.1.0112.641 FLA Connection Fix There was an issue experienced by some users wherein, sporadically throughout their Microvellum session, they would have an erroneous alert informing them that their ...
Toolbox Release Notes | Build 24.1.0108.641
The following release notes apply to Toolbox build 24.1.0108.641 Face 6 Filename Fix Users reported an issue with face 6 machining files, wherein after nesting a batch and examining the resultant G-code, they found that the face 6 barcode would be ...
Toolbox Release Notes | Build 24.1.0104.641
The following release notes apply to Toolbox build 24.1.0104.641 Module Trial Modification There was a noted issue regarding the “About” UI of the “Help” section of Toolbox, wherein users who requested a 30-day trial module of unpurchased Toolbox ...
Toolbox Release Notes: 2020-2024
This document will catalog all Microvellum Toolbox software builds that were released in the years of 2020-2024. This encompasses builds 20.1.0203.641 to 24.1.1206.641 (current). Year of 2024 This section catalogs all Microvellum Toolbox software ...