Formula
How would I go about adding this formula: IF(OR(Left_Fin_End=1,Right_Fin_End=1),-.5,"") To this formula: =IF(Bulge=0,Front_Build_Up_Length,IF(Bulge>1,PANELLENGTH_2,IF(Bulge<-1,PANELLENGTH_2,Front_Buildup_Length_Calc))) Basically I am trying to come up
Perfect Corner on MDF Door
Hello, Wondering if there is a way to make my "perfect corner" on an MDF door more "perfect"? I've attached an image below of what my corner looks like. As you can see, the corner is slightly rounded. Is there a way to make this corner more sharp? The
Videos and training about server setup and database management
Is using Microvellum on a server a taboo topic? Why are there no videos or training materials to assist? I think I know why but I would like to find out from the community. I found 1 video from an old wood hacks about using the library designer. Is this
Library Designer and Database Explorer
I created a sandbox with the latest library, when I pull up Library Designer or Database Explorer, I only see the library that is on the server. What step am I missing? My idea is to push everything to the new sandbox library products before updating
Product Labels by Batch
I'm running into a problem with the product label report. I can't get it to filter by batch. The product data has a column I could set up as a workorder relation (LinkIDWorkOrder) but there's no batch column (LinkIDWorkOrderBatch). Right now, I have the
New library setup on server
Hello guys, I am wondering to ask how to do make a new environment on server. Are the same process as is for the local setup? I would like to install new library on server but still keep the existing one, to test them and make own setup before total transition.
Add machining to an array or repeated object
As per the title i think it should be possible to add machining to an array like my attached picture, i keep having to do this, and it looks like i'm going to have plot each of these boxes manually. There are probably 3 other ways to do this same job,
Drawer Box Rear Gap in Foundation Library
Has anyone figured out how to globally modify the space between the drawer box back and the cabinet back. We generally try to keep this space no greater than 1-15/16". I cannot seem to figure this one out. I attached a screen shot to visually show the
include route in border
In the angled Sink Frame below I want to include the diagonal route in the border. This is happening on one biesse cnc & not the other. I thought it might be "include route in border" but this is checked on both machines. Anyone know where i control this?
Hinge plate offset from front
Question, looking for the way to adjust the hinge plate offset from the front in the foundation. I did find formulas in the "S" workbook for every door style in column K. The formula is =IF(IS_Face_Frame,0,M2U(37,G!Accuracy)+G!Door_to_Cabinet_Gap). I
Custom Starter Part / Appliance Panels to Buyout Report
We made some custom appliance panels (from a Misc Start Part) and when checked 'Is Buyout' - Nothing populates to the Buyout Report. - Can get it to work IF starting with a Door Front Only. What the magic that has to happen to get an item FLAGGED to show
Round Peg in a square hole
Ive just added some machining to a piece, and made a router cutter for some fluted work, my brother has just made a good point though that the flutes aren't being machined as if it was real life with a rounded end, they are a square end still. I'm assuming
Cabinet Mass/Weight and how it currently works
The last discussion about cabinet weight I found was from 3 years ago. While I can get information about the cabinets from MV and put it in a spreadsheet formula and get the material weight of a project, but that is tedious. Does anyone know what the
Configuration map to newly received Database data
From client received whole updated microvellum data folder, kept those database folder in local D drive, and tried to map confuguration with that database by changing 'pathtomicrovellumdata', is it correct way to map confuguration? or else any other method
Doubling up when Nesting
I have found that some pieces are doubling up when nested. I have one panel in the room, I have 1 panel in product prompts and part properties, I have 1 panel in product list. I is giving me 2 exact panels when nested. Anyone seen this before ? 25.1.106.641
Cnc Tools Stopping
Hi Microvellum. Just wanted to know if anyone else has had the problem of a tool stopping before it proceeds to its first cutting operation. Since we installed foundation library it seems as though tool 7 on both our machines sometimes stops at the point
Spreadsheet View(s) Top Row Save
Anyone know a tip on getting products or subassemblies to save so Row 1 is at the top? Randomly cutparts and subassemblies will put the last item (row 5, 10, etc) at the top of the screen. So you have to scroll/use scrollbar up to see the entire lis
Staircase Expansion - Tread/Riser Pocket
I must be missing something but can't find what it is. The treads & risers are not pockiting into the string? I've check all settings but no success. Anybody no why?
Hiring CNC Programmer
We are currently seeking a CNC Programmer (Microvellum Specialist) to join our team in Squamish BC or remotely in Canada.
How does everyone do Shop Drawings with View Ports
We've recently started using Microvellum, coming from software where each wall created its own view. We're running into an issue with our shop drawings, particularly when trying to show the inside of an island. When we switch to a back view in the viewport,
Is there a way to show Accuride drawer slide in section?
This is what I am getting, but I want to show the Accuride slide that would extend in the back. Is there a global for this or do i have to add drawblock for every size of slide?
Looking for someone using Nesting in Northern Indiana
We are a small cabinet shop in Northern Indiana, and have a panel saw and a vertical CNC. We are looking at getting a nested cnc to replace them both. If you are using the nesting module with a nested cnc in Northern Indiana, I'd love to take you to lunch
Drawer Box Locations
Hi All, Just wanted to see what/ how others are controlling wooden drawer box heights and locations IN A SIMPLE FAST AND INTUITIVE WAY!!!??? IE internal drawer unit within a robe or other cabinet. No drawer faces, but boxes with equal heights and spaces
Section finishes
Is anybody willing to share their formula for showing the text on the inside of the cabinet section for finishes?
Floating License quitting out while I'm logged in at work
We upgraded to one of the most recent versions of toolbox recently I received this error while I had active connection to the server and internet: Then I clicked Refresh License in Toolbox/Help, 10 minutes later I got another error (No screen shot, it
Cut parts wizard disappeared
Hello i was working on specification group but cut parts wizard disappeared. How could i fix it?
attributes not updating
Can't for the life of me figure out why the attributes aren't syncing with the MV project properties in my title block. I've tried adding them separately, syncing them, saving and it still won't update. I got 1 to work initially like its supposed to but
Replacing Products Best Practice
Hi all. Was wondering what you guys consider best practice for replacing products in an existing older job with newer / latest versions of the same product (but named and saved differently). Right now updating the library products and adding a suffix
Splitting Panel
Some of my panels exceed the sheet size limits for nesting. Is there a function in Microvellum to automatically or manually split them?
"Stored Formulas" - How to Define
Earlier I had looked into stored formulas but was unsure of how to manipulate them. When it comes to redundant processing of tasks, say combinations of VLOOKUP(...MATCH(...)) or Excel-ized formulas of mathematics like the distance formula, it would save
Closet Module
Hello Community, We're Looking into expanding our business and get in the Residential Closet Industry; We're looking for a software that is a good production and sales tool. Does anyone use the Microvellum Closet Module? Could you share your experience
New Toolbox Release Available Today: Build 25.1.0603.641
We are happy to announce that Toolbox build 25.1.0603.641 is now available! This build includes resolutions for issues with nest tabbing, sawing operations with specific file outputs, imported product files being named incorrectly, and more. Please refer
JOB
Microvellum and Autocad engineer wanted. Virginia fixture company looking to replace a retiring employee. Good benefits and relocation expenses.
Subassembly Library Management
I'm curious if anyone on CCL has had to clean up a really rough library and dealt with duplicate subassemblies? Is there a good way to sort the wheat from the chaff without having to test each one individually? If I do have to test them, does anyone have
How are people handling multiple "custom" pulls on a project or room?
I should start off with the fact that we are currently still running the CCL 50.3 library. Being in the residential sector we have many jobs that have 8+ pulls per room or job. We have one now where we have 10+ pulls in only 3 different rooms. For us,
Does changing reveals on doors change the space from door edge to center of hinge hole?
Recently I increased the reveals of doors in a cabinet to cabinet setting from 1/16" to 1/8". The program adjusted door sizes but didn't move the hinge cup bore. My question is, what is the standard practice? Moving the hinge cup bore, adjusting doors
How long would it take you to process ~500 cabinets into a Work Order?
We process approx. 9000 cabinets per week. We have work orders that range in size from 10 cabinets to 1500 cabinets. We are struggling with the slow speed in which Work Orders get created (500 cabts would take around 5 hours). Processing the batch is
How To Suppress Carcase Parts Drawing In Elevation
I am hoping one of the MV experts out there can tell me how to suppress the polylines that draw for carcase parts when drawing the elevation view of open cabinets. We used blind dado rabbet construction and MV generates rectangles that overlap eachother
Base Molding Doesnt go long enough
As per the title, when using the base moulding applied through the globals and or prompts, they dont follow the size of the applied panel on the returns. I think they should, i cant think of much of a reason why youd want the base moulding to cut short,
adding hardware
hey guys does anyone know a good video of how to add new hardware into MV
Next Page