2023 Builds
Toolbox Release Notes | Build 23.1.1219.641
The following release notes apply to Toolbox build 23.1.1219.641 FLA Fixes There was an issue with users who switched licenses from an FLA license to an SLA license having their software or session disconnected, and thus, being locked out of the ...
Toolbox Release Notes | Build 23.1.1212.641
The following release notes apply to Toolbox build 23.1.1212.641 FLA Session Management Figure 1: Session Management UI Figure 2: Session duration set. There was a noted concern with sessions on Microvellum closing and checking out of sessions if the ...
Toolbox Release Notes | Build 23.1.1205.642
The following release notes apply to Toolbox build 23.1.1205.642 New FLA Licenses The software has been given a number of overhauls to integrate and function with the new SLS system. Users with software serial numbers for all installed and activated ...
Toolbox Release Notes | Build 23.1.1120.641
The following release notes apply to Toolbox build 23.1.1120.641 New Report Group Option Figure 1: Report Groups (All Batches) A new option has been added within the processing center to assist in streamlining user reports. The option Report Groups ...
Toolbox Release Notes | Build 23.1.1114.641
The following release notes apply to Toolbox build 23.1114.641 Tooltips Fix Figure 1: Tooltips overlapping issue. There was an issue within the UI when hovering over the “Remove Material Trim from Scrap”. Rather than displaying a single tooltip, the ...
Toolbox Release Notes: Year of 2023
This document will catalog all releases for Microvellum Toolbox software builds that were released in the year 2023. This encompasses builds 23.1.0112.641 to 23.1.1219.642 (current). Toolbox Release Notes | Build 23.1.1219.641 The following release ...
Toolbox Release Notes | Build 23.1.1107.644
The following release notes apply to Toolbox build 23.1.1107.644 Event Log Error Fix There was a recurring error in the Event Log that occurred when users used a ROUTEDHOLE token for hardware machining. Tools of a certain size, when selected, would ...
Toolbox Release Notes | Build 23.1.1027.641
The following release notes apply to Toolbox build 23.1.1027.641 Report Group Fix Figure 1: Report group dialogue box. Figure 2: Report group "Do Not Show Again" option. There was an issue with the amount of dialogue box pop-ups when using report ...
Toolbox Release Notes | Build 23.1.1020.641
The following release notes apply to Toolbox build 23.1.1020.641 Corner Cabinet Dado Fix Figure 1: Dado Corner Cabinet routing issue. Figure 2: Dado Corner Cabinet routing fix. Users reported an issue when creating corner cabinets with dado ...
Toolbox Release Notes | Build 23.1.1016.641
The following release notes apply to Toolbox build 23.1.1016.641 Perfect Graining Fixes Several fixes have been applied to resolve issues that were found occurring when using the “Perfect Graining” setting while drawing products: Figure 1: Graining ...
Toolbox Release Notes | Build 23.1.1010.641
The following release notes apply to Toolbox build 23.1.1010.641 Extruded Products Fix Figure 1: Pick Points extrusion issue. There were reportedly issues occurring when using extruded products, namely, a problem of failure to register extruded ...
Toolbox Release Notes | Build 23.1.1003.641
The following release notes apply to Toolbox build 23.1.1003.641 Work Order Lag Fix It was noted by users that there was a reoccurring issue of excessive load times when attempting to edit work orders. The issue notedly did not occur when creating ...
Toolbox Release Notes | Build 23.1.0921.641
The following release notes apply to Toolbox build 23.1.0921.641 Cumulative Library Updates Fix Figure 1: Cumulative Update issue. There was a bug noted by users while attempting to download the Foundation Library’s phase 1 cumulative update and ...
Toolbox Release Notes | Build 23.1.0913.641
The following release notes apply to Toolbox build 23.1.0913.641 Part Properties UI Fixes The Microvellum Development team noted some errors in the UI of the Part Properties console. Figure 1: Token copy/pasting issue after [END]. Figure 2: Token ...
Toolbox Release Notes | Build 23.1.0908.641
The following Release Notes apply to Toolbox build 23.1.0908.641 Hardware Associated Machining Fix Figure 1: ROUTEDHOLE machining issue. Figure 2: ROUTEDHOLE issue fixed. There were noted issues with ROUTEDHOLE and CUTOUT tokens, when used with ...
Toolbox Release Notes | Build 23.1.0901.641
The following Release Notes apply to Toolbox build 23.1.0901.641 Saw Oversizing Fix Figure 1: Sawing oversize report issue. There was a reported issue with selecting a part to oversize: in the saw optimization processing station, enabling an ...
Toolbox Release Notes | Build 23.1.0830.641
The following Release Notes apply to Toolbox build 23.1.0830.641 Server Log Fix Before After Figure 1: MV Server Log issue. Figure 2: MV Server Log fixed. It was noted that when processing a work order using the Microvellum server, there was an issue ...
Toolbox Release Notes | Build 23.1.0821.641
The following Release Notes apply to Toolbox build 23.1.0821.641 Dado Machine Token Fixes A number of reported issues with Dado Machine Tokens have been examined and resolved. It was reported by users wherein they were unable to prevent associative ...
Toolbox Release Notes | Build 23.1.0811.641
The following Release Notes apply to Toolbox build 23.1.0811.641 UI Overhauls Fixes Before After Figure 1: "Add Part" loop error message. Figure 2: "Add Part" message fix. Users reported an issue wherein the software would error out into an endless ...
Toolbox Release Notes | Build 23.1.0808.641
The following Release Notes apply to Toolbox Build 23.1.0808.641 2D Drawing Overhauls Fixes Before After Figure 1: 2D font error. Figure 2: 2D font fix. An issue was noted and resolved wherein creating 2D drawings of 2 identical products caused the ...
Toolbox Release Notes | Build 23.1.0801.641
The following Release Notes apply to Toolbox build 23.1.0801.641 Horizontal Drilling Cam Locks Fix There was an issue wherein the horizontal drilling for cam locks would not calculate different Z location values for parts with face 5 and face 6 ...
Toolbox Release Notes | Build 23.1.0725.641
The following Release Notes apply to Toolbox build 23.1.0725.641 New Nesting Optimization Settings Figure 1: New nesting optimizer settings. The nesting optimizer has 2 new settings added to it: "Best Yield Preserve Grouping" and "Favor Best Fit". ...
Toolbox Release Notes | Build 23.1.0718.641
The following Release Notes apply to Toolbox build 23.1.0718.641 Saw Output Fixes When compiling G-Code, the saw output sometimes included invalid characters, causing cuts to occasionally miss or code to be rejected by the system. This has been ...
Toolbox Release Notes | Build 23.1.0706.641
The following Release Notes apply to Toolbox build 23.1.0706.641 Machine Cannot Offset Routing Fixes A number of issues have been reported involving the MCOR setting and certain routes to fail while using the new offset algorithm: Figure 1: MCOR ...
Toolbox Release Notes | Build 23.1.0627.641
The following Release Notes apply to Toolbox Build 23.1.0627.641 Pocket Hatching Loop Fix Users reported an issue when utilizing pocket hatching with an extremely small width, which caused the software to be stuck in a loop and crash. This issue has ...
Toolbox Release Notes | Build 23.1.0621.641
The following Release Notes apply to Toolbox Build 23.1.0621.641 Vertical Drill Machining Fix Figure 1: Vertical Drill disappearance fix. An issue was noted, which caused vertical drilling to disappear if it crossed the threshold of the prat border. ...
Toolbox Release Notes | Build 23.1.0613.641
The following Release Notes apply to Toolbox Build 23.1.0613.641 Edge Band Materials Fix An error was reported that caused project edge band materials to overwrite the template records if a user ran “find and replace” and then “Add Component From ...
Toolbox Release Notes | Build 23.1.0605.641
Report Groups Fix A fix has been made to resolve an issue that reportedly caused errors when report groups attempted to print manually. Fixes and Additions to Part Properties Toolbox Console->Part Properties/Toolbox Setup->Options 2D drawing tokens ...
Toolbox Release Notes | Build 23.1.0525.641
Hardware Machine Token Tool Compensation Fix Users reported an issue that caused hardware machine tokens to produce tool compensation incorrectly. This issue has been examined and resolved. Work Order Cancellation Fix Microvellum Console->Settings ...
Toolbox Release Notes | Build 23.1.0523.641
Face 6/Horizontal Drilling Enhancement Toolbox Setup->Options->Toolfiles->Double-click specific Toolfile->Integrated Post Processor Settings->Settings Users will now be able to cut down on file management by producing a singular line of G-Code for ...
Toolbox Release Notes | Build 23.1.0407.641
Toolbox Release Notes | Build 23.1.0407.641 Projects Resolutions: Resolved an issue that caused lag when adjusting wall size. Resolved an issue that created empty rows in the Projects table after certain workflows. Work Orders Resolutions: The work ...
Toolbox Release Notes | Build 23.1.0329.641
Toolbox Release Notes | Build 23.1.0329.641 Processing Center Resolutions: Resolved an error in the ‘View Nesting G-Code Results’ UI when trying to view DXF’s. ‘Modify Work Order’ will no longer remove certain edge band information if editing that ...
Toolbox Release Notes | Build 23.1.0313.641
Toolbox Release Notes | Build 23.1.0313.641 Label Images Resolutions: Resolved an issue with PTP stations not flipping the face 6 WMF image correctly. WMF orientation should now match the gcode. Resolved an issue with Unified Work Order databases not ...
Toolbox Release Notes | Build 23.1.0222.641
The following Release Notes apply to Toolbox Build 23.1.0222.641. Machine Tokens Resolutions: We fixed a bug affecting certain libraries that used the CONST token, which led to incorrect calculations of the distance between holes. We also fixed an ...
Toolbox Release Notes | Build 23.1.0216.641
The following Release Notes apply to Toolbox Build 23.1.0216.641. Ardis Label Resolutions: • Fixed an issue where face6 barcode information was not displaying on Ardis labels. PTP Processing Station Resolutions: • Corrected an issue that caused ...
Toolbox Release Notes | Build 23.1.0208.641
The following Release Notes apply to Toolbox Build 23.1.0208.641. Saw Scrap Label Modifications: Added a setting to turn on/off material trim for scrap on the edge of a sheet (defaults to on to prevent breaking changes). Nest Drawing Resolutions: ...
Toolbox Release Notes | Build 23.1.0202.641
The following Release Notes apply to Toolbox Build 23.1.0202.641. SQL Connection Resolutions: • The issue causing random data connection errors has been fixed. 2D Drawings Resolutions: • An issue that prevented hardware from being visible for some ...
Toolbox Release Notes | Build 23.1.0112.641
The following Release Notes apply to Toolbox Build 23.1.0112.641. ERP Estimating Resolutions: An issue with the "Show Product Cost Details" not displaying buyout parts has been fixed. An issue that caused the calculation of the material cost to be ...